JSP Safety Helmets

The JSP range of head protection meets the requirements of industry where there is a risk of being injured by falling objects or when working in areas of restricted headspace. A safety helmet needs to protect the wearer from falling objects, collapsing structures and protruding extensions. Choosing the correct head protection is one of the most important decisions you will make when working in Construction and Industry where there is the risk of objects falling on the head, so why compromise JSP offers a large range of hard hats and safety helmets.

The Mark 3 Comfort Plus safety helmet from JSP is Europe's most popular design, these stylish helmets are tough, functional and offer an extremely comfortable secure fit on the head for prolonged periods of use. To make the Mark 3 as comfortable to wear as possible it has a replaceable foam sweatband and a 6-point Terylene webbing comfort plus a suspension harness, that supports the impact-resistant low dome profile UV stabilised high-density polyethylene shell, which incorporates a rain channel.

Fits head sizes: 530-620mm sizing (6,1/2"-7,3/4")
Helmet offers 440V electrical insulation
Accepts Cliptite accessories

Conforms to: EN397, ANSI Z89

Mark 3 Comfort Plus Safety Helmet

The Mark 3 Comfort Plus safety helmet with slip ratchet size adjustment system.

JSP Safety Helmets

The JSP range of head protection meets the requirements of industry where there is a risk of being injured by falling objects or when working in areas of restricted headspace. A safety helmet needs to protect the wearer from falling objects, collapsing structures and protruding extensions. Choosing the correct head protection is one of the most important decisions you will make when working in Construction and Industry where there is the risk of objects falling on the head, so why compromise JSP offers a large range of hard hats and safety helmets.

The Mark 3 Comfort Plus safety helmet from JSP is Europe's most popular design, these stylish helmets are tough, functional and offer an extremely comfortable secure fit on the head for prolonged periods of use. To make the Mark 3 as comfortable to wear as possible it has a replaceable foam sweatband and a 6-point Terylene webbing comfort plus a suspension harness, that supports the impact-resistant low dome profile UV stabilised high-density polyethylene shell, which incorporates a rain channel.

Fits head sizes: 530-620mm sizing (6,1/2"-7,3/4")
Helmet offers 440V electrical insulation
Accepts Cliptite accessories

Conforms to: EN397, ANSI Z89

Mark 3 Comfort Plus Safety Helmet

The Mark 3 Comfort Plus safety helmet with wheel ratchet size adjustment system.

MK7 Comfort Plus Safety Helmet

The Mark 7 helmet has been designed with comfort, performance and style in mind and incorporates the most innovative features seen yet on a safety helmet. Conforms to EN 397.
High performance protection, standard peak, ventilated, 8-point terylene webbing harness. Easyjust slip ratchet harness suitable for sizes 16 1/2 -20cm (6 1/2'' -8''). Leatherette absorbent sweatband. Rain channel.

Surefit Polycarbonate Safety Visor

The JSP Surefit Safety Visor is for use with the Mark 2 and Mark 3 safety helmets from JSP it has been designed with two point travel so that it either springs firmly in place, down onto the peak of the helmet (both standard peak and short peak), or is sprung in its stand off position raised conveniently out of the way.
Conforms to: EN166 1.F.3.

MK7 Comfort Plus Safety Helmet

The Mark 7 helmet has been designed with comfort, performance and style in mind and incorporates the most innovative features seen yet on a safety helmet. Conforms to EN 397.
High performance protection, standard peak, ventilated, 8-point terylene webbing harness. Easyjust slip ratchet harness suitable for sizes 16 1/2 -20cm (6 1/2'' -8''). Leatherette absorbent sweatband. Rain channel.

Surefit Unbound Acetate Visor

Attachment for the Mark 7 helmet (Helmet supplied separately). Offers protection against low energy, high speed particles at 45m/s (101mph) and liquid droplets. The optical qualities of the visor comply with requirements of optical class 1. EN166 1.B.3.9.

JSP Safety Helmets

The JSP range of head protection meets the requirements of industry where there is a risk of being injured by falling objects or when working in areas of restricted headspace. A safety helmet needs to protect the wearer from falling objects, collapsing structures and protruding extensions. Choosing the correct head protection is one of the most important decisions you will make when working in Construction and Industry where there is the risk of objects falling on the head, so why compromise JSP offers a large range of hard hats and safety helmets.

The Mark 3 Comfort Plus safety helmet from JSP is Europe's most popular design, these stylish helmets are tough, functional and offer an extremely comfortable secure fit on the head for prolonged periods of use. To make the Mark 3 as comfortable to wear as possible it has a replaceable foam sweatband and a 6-point Terylene webbing comfort plus a suspension harness, that supports the impact-resistant low dome profile UV stabilised high-density polyethylene shell, which incorporates a rain channel.

Fits head sizes: 530-620mm sizing (6,1/2"-7,3/4")
Helmet offers 440V electrical insulation
Accepts Cliptite accessories

Conforms to: EN397, ANSI Z89

Mark 3 Comfort Plus Safety Helmet

The Mark 3 Comfort Plus safety helmet with wheel ratchet size adjustment system.

JSP Hard Hats

The NEW HardCap A1 is another major innovation from JSP in head protection design. It exceeds the most recent standards and offers unrivalled protection in both performance and style. Sleek and low profile, it's almost impossible to distinguish from a standard high street' baseball cap. The unique angled adjuster designed to fit under the occipital bone at the rear of the skull; means one size really does fit all, particularly when combined with the castellated protective liner. The liner is removable, so that the cap part is can be washed in a machine for improved hygiene. It has a terry-towelling sweatband for added comfort and all colour-ways have subtle reflective piping for added visibility safety.

HardCap A1 features:
Low profile design.
Ventilated for coolness and comfort.
Removable liner.
All round protection.
Reflective piping.
Sweat band.
Unique adjuster.

Available in a choice of colours: Navy blue, black, black/grey, grey/Red, Royal blue/yellow and black/hi-viz orange.

HardCap A1+

JSP Safety Helmets

The JSP range of head protection meets the requirements of industry where there is a risk of being injured by falling objects or when working in areas of restricted headspace. A safety helmet needs to protect the wearer from falling objects, collapsing structures and protruding extensions. Choosing the correct head protection is one of the most important decisions you will make when working in Construction and Industry where there is the risk of objects falling on the head, so why compromise JSP offers a large range of hard hats and safety helmets.

The Mark 3 Comfort Plus safety helmet from JSP is Europe's most popular design, these stylish helmets are tough, functional and offer an extremely comfortable secure fit on the head for prolonged periods of use. To make the Mark 3 as comfortable to wear as possible it has a replaceable foam sweatband and a 6-point Terylene webbing comfort plus a suspension harness, that supports the impact-resistant low dome profile UV stabilised high-density polyethylene shell, which incorporates a rain channel.

Fits head sizes: 530-620mm sizing (6,1/2"-7,3/4")
Helmet offers 440V electrical insulation
Accepts Cliptite accessories

Conforms to: EN397, ANSI Z89

Mark 3 Comfort Plus Safety Helmet

The Mark 3 Comfort Plus safety helmet with wheel ratchet size adjustment system.

Surefit Unbound Polycarb Visor

Attachment for the Mark 7 helmet (Helmet supplied separately). Offers protection against medium energy, high speed particles at 120m/s (270mph) and liquid droplets and molten metal. The optical qualities of the visor comply with requirements of optical class 1. EN166 1.B.3.9.