Easy Read Dial Gauges Plunger Type

Matt finish chromed housings and black oxidised limit hands. Shockproof mechanism. Fitted with 1/4" inside diameter stem. Manufactured to BS 907.



58mm (2 1/4") Dial Diameter

05. 'T' Series

These indicators have a switch lever for reversing the direction of movement. Lever mounted in ball bearings. Fitted with 4mm/1/4" diameter top spigot and holder body side clamp which accepts rods up to 6.5mm/0.256". Indicator body machined with dovetail to suit attachments.

Kennedy® Dial Gauge Accessories

For all Kennedy plunger type dial gauges. Steel. (Dial gauge NOT included)

Replacement Anvils

'Rapid' Dial Test indicator

Dial face inclined to the workpiece surface to ensure good visual accessibility also incorporates a rear swivel spigot which enables centring without additional attachments. Dovetail clamping sides top and bottom. Automatic reversal movement. Dial swivels through 180 of arc and rotates for zero setting, hands travel in one direction. Jewelled with lever pivots mounted on ball bearings. 4mm (1/4") diameter spigot.

Kennedy® Easy Read Dial Gauges Plunger Type

Easy Read Dial Gauges & DTI's are designed for countless applications and available in two basic styles. With shockproof mechanisms and clear, "Easy Read" faces for zero setting. All models are operational in both directions. Supplied in fitted cases with accessories storage space. Matt finish chromed housings and black oxidised limit hands. Fitted with 1/4" inside diameter off-set back lug and 5/16" diameter stem. Manufactured to BS 907.



58mm Dial Diameter.

Kennedy® Spares

Crystal face for KEN-300-8010K, 8020K, 8030K.

Kennedy® Replacement Stylus

Tungsten carbide. Replacement stylus for all Kennedy lever type dial test indicators (except dual reading stylus for KEN-300-4000K). N.B. Dial guage not included.

Old style stylus & collar DTI's (2.0mm)

'Rapid' Dial Test indicator

Dial face inclined to the workpiece surface to ensure good visual accessibility also incorporates a rear swivel spigot which enables centring without additional attachments. Dovetail clamping sides top and bottom. Automatic reversal movement. Dial swivels through 180 of arc and rotates for zero setting, hands travel in one direction. Jewelled with lever pivots mounted on ball bearings. 4mm (1/4") diameter spigot.

05. 'T' Series

These indicators have a switch lever for reversing the direction of movement. Lever mounted in ball bearings. Fitted with 4mm/1/4" diameter top spigot and holder body side clamp which accepts rods up to 6.5mm/0.256". Indicator body machined with dovetail to suit attachments.

57.4mm Diameter Face

With Limit Hands and Rev. Counter

Series 2