产品 / 工装夹具 / 快速异型夹
编号：IND4434170K
●产品描述：
Horizontal Industrial Toggle Clamps
With a low profile design suitable for use in applications requiring increased access to the actual workpiece. Available in 8 sizes for general application in areas where a lower profile is required. Force applied downwards 90 to bar.
Latch Type Toggle Clamp
U-Style Bolt. Suitable for sealing chamber doors or mould closures. The latched bolts are threaded to allow easy adjustment and provide positive connection with latch plate.
编号：BRA4101202C
●产品描述：
Push-Pull Clamps
Features: Comfortable, cushioned PVC orange handle grips. With flanged base and fixed position spindle.Specification: The main components are of zinc plated and passivated steel. Rivets are of stainless steel, which burnishes and work-hardens with use.
编号：BRA4101206T
●产品描述：
Slimline Push-Pull Clamp
Mounts either directly into a threaded or plain hole in a fixture, or can be mounted in a bracket. Plunger locks at both extended and retracted ends od the stroke. Supplied with MB1050 set screw and nut. Base: Nose mounting. Nominal holding force: 750 daN.
编号：IND4431590K
●产品描述：
Vertical Industrial Toggle Clamps
Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production. Clamping Capacity - the forces stated are the maximum loads that can be applied without causing permanent deformation. Due to leverage ratios, the holding capacity will be greatest at the point on the bar nearest to the handle of the clamp and forces stated have been achieved at this point.
'U' Bar (Adjustable) Type
Flanged Base
编号：IND4435070K
●产品描述：
Heavy Duty Weldable Toggle Clamps
Hold down action suitable for high production automotive type applications. Heavy duty forged components with hardened and ground pivot points. The users provide their own handle and bar and weld them to the clamp which is then welded to a base. These flexible mounting clamps allows them to be used in situations where standard clamps are not effective.
编号：IND4434110K
●产品描述：
Horizontal Industrial Toggle Clamps
With a low profile design suitable for use in applications requiring increased access to the actual workpiece. Available in 8 sizes for general application in areas where a lower profile is required. Force applied downwards 90 to bar.
Latch Type Toggle Clamp
90 Angle U-Style Bolt. Suitable for sealing chamber doors or mould closures. The latched bolts are threaded to allow easy adjustment and provide positive connection with latch plate.
编号：BRA4101200V
●产品描述：
Push-Pull Clamps
Features: Comfortable, cushioned PVC orange handle grips. With flanged base and fixed position spindle.Specification: The main components are of zinc plated and passivated steel. Rivets are of stainless steel, which burnishes and work-hardens with use.
编号：BRA4101466S
●产品描述：
Vertical Industrial Clamps
Features: Comfortable, cushioned PVC orange handle grips. Specification: The main components are of zinc plated and passivated steel. Rivets are of stainless steel, which burnishes and work-hardens with use, the rivets of the larger clamps rotating in hardened bushes or directly in the close-toleranced holes of hardened parts.
编号：IND4431570K
●产品描述：
Vertical Industrial Toggle Clamps
Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production. Clamping Capacity - the forces stated are the maximum loads that can be applied without causing permanent deformation. Due to leverage ratios, the holding capacity will be greatest at the point on the bar nearest to the handle of the clamp and forces stated have been achieved at this point.
Fixed Spindle & Solid Bar Type
Straight Base
编号：IND4433100K
●产品描述：
Push Pull Industrial Toggle Clamps
The straight line action which gives these plunger-style clamps extremely high loading capacities whilst maintaining compactness. These clamps also lock in the open position which allows a 'pull' to be exerted (for instance, in use with foam moulds). All models have tapped spindles for use with adjustable spindles.
Base Mounted Type (Flanged)
45 Handle