Horizontal Industrial Toggle Clamps

With a low profile design suitable for use in applications requiring increased access to the actual workpiece. Available in 8 sizes for general application in areas where a lower profile is required. Force applied downwards 90 to bar.

Latch Type Toggle Clamp

J-Style Bolt. Suitable for sealing chamber doors or mould closures. The latched bolts are threaded to allow easy adjustment and provide positive connection with latch plate.

Horizontal Industrial Toggle Clamps

With a low profile design suitable for use in applications requiring increased access to the actual workpiece. Available in 8 sizes for general application in areas where a lower profile is required. Force applied downwards 90 to bar.

Latch Type Toggle Clamp

90 Angle U-Style Bolt. Suitable for sealing chamber doors or mould closures. The latched bolts are threaded to allow easy adjustment and provide positive connection with latch plate.

Toggle Clamp Spares

For use with adjustable 'U' bar type clamps and solid bar type clamps that have bolt retainers.

Neoprene Capped Spindles

Vertical Industrial Toggle Clamps

Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production. Clamping Capacity - the forces stated are the maximum loads that can be applied without causing permanent deformation. Due to leverage ratios, the holding capacity will be greatest at the point on the bar nearest to the handle of the clamp and forces stated have been achieved at this point.

Fixed Spindle & Solid Bar Type

Flanged Base

Vertical Industrial Toggle Clamps

Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production. Clamping Capacity - the forces stated are the maximum loads that can be applied without causing permanent deformation. Due to leverage ratios, the holding capacity will be greatest at the point on the bar nearest to the handle of the clamp and forces stated have been achieved at this point.

Fixed Spindle & Solid Bar Type

Straight Base

Toggle Clamp Spares

For use with adjustable 'U' bar type clamps and solid bar type clamps that have bolt retainers.

Neoprene Capped Spindles

Horizontal Industrial Toggle Clamps

With a low profile design suitable for use in applications requiring increased access to the actual workpiece. Available in 8 sizes for general application in areas where a lower profile is required. Force applied downwards 90 to bar.

'U' Bar (Adjustable) Type

Tipped Spindle

Vertical Industrial Toggle Clamps

Designed to improve performance in fabrication and engineering clamping applications. The rapid clamping/unclamping made possible by the use of toggle clamps can greatly reduce machine/operator 'down-time' during all stages of production. Clamping Capacity - the forces stated are the maximum loads that can be applied without causing permanent deformation. Due to leverage ratios, the holding capacity will be greatest at the point on the bar nearest to the handle of the clamp and forces stated have been achieved at this point.

'U' Bar (Adjustable) Type

Flanged Base

Push Pull Industrial Toggle Clamps

The straight line action which gives these plunger-style clamps extremely high loading capacities whilst maintaining compactness. These clamps also lock in the open position which allows a 'pull' to be exerted (for instance, in use with foam moulds). All models have tapped spindles for use with adjustable spindles.

Base Mounted Type (Flanged)

45 Handle

Heavy Duty Weldable Toggle Clamps

Hold down action suitable for high production automotive type applications. Heavy duty forged components with hardened and ground pivot points. The users provide their own handle and bar and weld them to the clamp which is then welded to a base. These flexible mounting clamps allows them to be used in situations where standard clamps are not effective.