Galvanised Steel Wire Rope 180kg/mm2

6 x 19 fibre core galvanised, for crane ropes, small hoist-block ropes, slings etc.

Length: 20m

Beam Clamps

1 to 5 ton range capacities. Clamp jaw designed to reduce flange stress by distributing load away from I-beam flange edge. Easily mounted with threaded handle. Fits a wide range of flange widths and beams.

Galvanised Steel Wire Rope 180kg/mm2

6 x 19 fibre core galvanised, for crane ropes, small hoist-block ropes, slings etc.

Length: 20m

Galvanised Steel Wire Rope 180kg/mm2

6 x 19 fibre core galvanised, for crane ropes, small hoist-block ropes, slings etc.

Length: 200m

Complete Skate Kits

For short, variable transportation distances. For installation works and movement of heavy loads. The steering handle gives you precise control making it easy to manoeuvre large machinery or into tight areas. Moving speed not exceeding 5m/min. Minimum turning cycle is 3m.

SK30

Capacity (tonne): 30.
Dimensions (H x W x L): 117 x 120 x 120mm.

Galvanised Steel Wire Rope 180kg/mm2

6 x 19 fibre core galvanised, for crane ropes, small hoist-block ropes, slings etc.

Length: 50m

RAPTOR STCM Load Moving System

RAPTOR STCM Load Moving Skate System is generally used for moving heavy objects at low cost. The load can first be lifted by using the roller crowbar or a Jack. These three part skate systems comprise of two fixed rear skates which are adjustable up to 1.5m and a front steerable skate c/w handle.



Capacity: 24000kg.
Number of rollers: 24.
Wheels: steel.
Weight per set: 130kg.

Galvanised Steel Wire Rope 180kg/mm2

6 x 19 fibre core galvanised, for crane ropes, small hoist-block ropes, slings etc.

Length: 50m

Yale Hand Chain Hoists

Compact and robust steel housing. Zinc plated for corrosion resistance. Drop forged steel, fracture resistant load hooks which are equipped with safety latches and also rotate 360. High strength alloy steel link chain according to DIN 5684. Fully enclosed, self activating load brake with asbestos free friction discs. Hardened two stage reduction gear with hardened pinions, which are supported by roller bearings for increased efficiency. Both models can be equipped with an optional slip clutch. The low overall height allows for use in restricted areas. Height of lift: 3m.

Block Trolleys - Geared

Double sealed ball bearings. Built-in bumper guards. Adjustable to fit various sizes of flange and I-beam. Can be used on straight or curved track. Can be installed or removed at any point along the track. 10 & 20 ton models available on request.