Compact Air Engraving Pen

CP9160
Compact body with finger tip speed control for enhanced control and accurate engraving.

Blows per minute: 32,400.
Air inlet: 1/4" BSP/NPT.
Overall length: 147mm.
Noise level: 59dB(A).
Vibration: 7.0m/s2.

Lightweight, balance & power.

CP7729
3/8” compact impact wrench. Twin hammer clutch. Composite handle and magnesium clutch housing. S2S technology and 3 positive power settings. Full power in reverse up to 415ft.lbs (563Nm). Lightweight and low noise level tool. Maximise operator comfort with an extremely well balanced tool. Most convenient and unique reverse technology in the market.

Output drive: 3/8”.
Free speed: 9,400rpm.
Working torque range: 68 - 407Nm.
Maximum torque: 563Nm.
Average air consumption: 5cfm.
Air consumption @ load: 20cfm.
Air consumption @ load: 9.4l/s.
Air inlet NPTF: 1/4.
Sound pressure: 91dBA.
Vibration a (ISO-28927-2): 6.4m/s2.
Vibration K (ISO-28927-2): 1.9m/s2.
Overall length: 163mm.
Weight: 1.2kg.

Chicago Pneumatic 10mm Slimline Pistol Grip Drill

CP1064
10mm (3/8") capacity chuck. High-powered pistol drill. Slim design - compact and lightweight.

Free speed: 2,500rpm.
Air inlet: 1/4” BSP/NPT.
Air consumption: 19.7cfm.
Spindle thread: 3/8” - 24f.
Chuck capacity: 10mm (3/8”).
Air hose bore: 10mm 3/8”.
Noise level: 83dBA.
Vibration level: <2.5m/s2.
Overall length: 225mm.
Weight: 0.70kg.

Chicago Pneumatic? 13mm General-Purpose Air Drill

CP-789-HR
Teasing throttle for precise control, handle exhaust, needle bearing gearings. Suitable for heavy drilling, reaming, hole sawing and jobs requiring a lot of torque.
1/4” NPT air inlet thread for 10mm air hose, 4cfm* air consumption, 3/8” - 24 spindle thread.
Overall length: 200mm.

*Based on a 15 second cycle per minute average use.