Dijet and Indexa Seiki? Toolholder and Insert Sets

This set contains an Indexa Seiki? PCLNR boring bar and 10 Dijet CCMT inserts.

PCLNR Toolholder and Insert Set

This Dijet and Indexa Seiki? Toolholder and Insert SetSet contains:
1x PCLNR toolholder
and 10x CNMG inserts grade JC215V.
PCLNR 2525M12 - Right Hand
95 approach for negative 80 rhombic
inserts.
0.02 - 0.6mm/rev.
D.O.C.: 0.5 - 6.5mm.

Grade description for Dijet JC215V: (ISO P10-P40 K25-K40).
On the weather-resistance and tougher base material, multi-thicker coating are adopted. This grade shows twice better tool life as conventional grade. Medium to high speed cutting for steels and medium speed cutting for cast iron. UT - With a low feed rate and small depth of cut, excellent metal removal can be obtained. Reduces the cutting force and prevents the excessive built-up edge in cutting mild steels, low carbon steels and alloy steels.

Dijet and Indexa Seiki? Toolholder and Insert Sets

This set contains an Indexa Seiki? SCLCR boring bar and 10 Dijet CCMT inserts.

SCLCR Boring Bar and Insert Set

This Dijet and Indexa Seiki? Toolholder and Insert Set consists of 1x SCLCR screw on style boring bar and 10x CCMT inserts.
S16R SCLCR 09 - Right Hand
95 approach for 7 positive.
80 rhombic inserts.
0.05 - 0.3mm/rev.
D.O.C.: 0.25 - 2mm.

Grade description for Dijet JC215V: (ISO P10-P40 K25-K40).
On the weather-resistance and tougher base material, multi-thicker coating are adopted. This grade shows twice better tool life as conventional grade. Medium to high speed cutting for steels and medium speed cutting for cast iron. UT - With a low feed rate and small depth of cut, excellent metal removal can be obtained. Reduces the cutting force and prevents the excessive built-up edge in cutting mild steels, low carbon steels and alloy steels.

Dijet and Indexa Seiki? Toolholder and Insert Sets

This set contains an Indexa Seiki? PCLNR boring bar and 10 Dijet CCMT inserts.

PCLNR Toolholder and Insert Set

This Dijet and Indexa Seiki? Toolholder and Insert Set contains:
1x PCLNR toolholder
and 10x CNMG inserts.
PCLNR 2020K12 - Right Hand
95 approach for negative 80 rhombic
inserts.
0.02 - 0.6mm/rev.
D.O.C.: 0.5 - 6.5mm.

Grade description for Dijet JC215V: (ISO P10-P40 K25-K40).
On the weather-resistance and tougher base material, multi-thicker coating are adopted. This grade shows twice better tool life as conventional grade. Medium to high speed cutting for steels and medium speed cutting for cast iron. UT - With a low feed rate and small depth of cut, excellent metal removal can be obtained. Reduces the cutting force and prevents the excessive built-up edge in cutting mild steels, low carbon steels and alloy steels.