MTR110 Surface Roughness Tester

The Moore & Wright Surfmatic MTR110 is a pocket sized surface roughness measuring instrument ideally suited to rapid on-the-spot surface measurements.

Features:
Back-light LCD.
Dynamic Test Display: progress of cut-off length during testing.
Li-ion rechargeable batteries.
Protection slide on pick-up.
Auto-off after 90 seconds.
Pocket-size and economically priced.
Both Ra and Rz parameters in one instrument.
Features external calibration.
Large measuring range suitable for most materials.
Piezo-electric pick-up stylus for external surface.
(Note: When ordering this unit please specify UK/Euro Charger units).

Technical data and characteristics:
Dynamic display during testing, sound signal start-test-ready, auto-off 90 sec, back-light LCD.
Roughness parameters: Rz and Ra.
Measuring range: Rz 0.10-50 um/Ra 0.05-15.0 um.
Cut-off lengths: 0.25mm, 0.8mm, 2.5mm.
Tracing length: 6mm.
Tracing speed: 1mm/sec.
Admissible temperature range: 0-40C.
Power supply: 3.0 V/Li-ion batteries/low battery indication.
Dimensions and weight: 102mm x 70mm x 22mm - Weight 180g.
Charger: 9V DC.
Min. curvature of cylindrical surface 40mm diameter (V-grooved base).
Ra and Rz:
Rz is the mean of all of the maximum peak to valley heights, from each sampling length, within the assessment length.
Ra is the universal recognised and most used international parameter of roughness.
It is the arithmetic mean of the absolute departures of the roughness profile from the mean line.
(Note: UK/Euro Charger units not supplied with surface roughness tester - see above).