Kennedy® Flush Cutting Round Cable Stripper

Cable stripper for round and continental type cables of 8-13mm dia (e.g. NYM 3 x 1,5mm up to 5 x 2,5mm). Flush stripping even in hard-to-reach areas, e.g. ceiling and wall areas, junction and distribution boxes, switch cabinets, etc. The ergonomic tool design provides a sure grip and safe handling. Needs no adjustment of the cutting depth.

Kennedy® Crimping Pliers

The Kennedy® TCI006 crimping pliers are for use when crimping insulated terminals. The full cycle ratcheting crimp action has an adjustable preset crimp pressure for accurate crimping.

Manufactured from carbon steel with hardened and tempered jaws that are chemically blacked finish with colour coded jaws and PVC handles.

TCI006 Ratchet Action Crimping Pliers

Capacity:
Red: 0.5-1.5mm2, AWG 20-16.
Blue: 2.5mm2, AWG 14.
Yellow: 4.0-6.0mm2, AWG 12-10.

Kennedy® Standard Industrial Terminals - Blue Female Push-On

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Kennedy® Electricians' Shears

For use on soft cable up to 22mm diameter, can also be used for stripping, cutting insulation materials, electrical tape and cable ties. High carbon stainless steel blades with hardened edge with vanadium & molybdenum for long lasting edge - HRC58-60 with one cutting edge serrated to reduce slipping and notched blade for tough and large diameter cuts. Tough, lightweight nylon handles. Supplied with handy clip-on belt pouch.

Cutting length: 45mm (1,3/4").

Kennedy® Standard Industrial Terminals - Yellow Fork

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Kennedy® Uninsulated Terminal Crimp Tool

Suitable fot Model no: TCU016

Kennedy® Standard Industrial Terminals - Red Fork

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Kennedy® Standard Industrial Terminals - Red Ring

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Kennedy® Standard Industrial Terminals - Yellow Male Tab

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Kennedy® Heat Shrink Tubing Sets

Suitable for connecting, end handling, electric wire insulating and harnessing, corrosion proofing metal rods and tubes, antenna protection. Made from Halogen free environmentally friendly Polyolefin which is flame retardant and RoHS compliant. Its operating temperature is from 55°C to 125°C and shrinking starts at 70°C and becomes totally shrunk at 110°C. It's shrink ratio is 2:1 and has a maximum electrical rating of 600 Volts.

Heat Shrink Tubing Set 32 Piece

For insulating wire connectors. Non-flammable polyethylene. 4.8mm (16), 6.4mm (12) and 9.5mm (4) diameter by 35mm long.