Kennedy® Standard Industrial Terminals - Blue Blade

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Kennedy® Heat Shrink Tubing Sets

Suitable for connecting, end handling, electric wire insulating and harnessing, corrosion proofing metal rods and tubes, antenna protection. Made from Halogen free environmentally friendly Polyolefin which is flame retardant and RoHS compliant. Its operating temperature is from 55°C to 125°C and shrinking starts at 70°C and becomes totally shrunk at 110°C. It's shrink ratio is 2:1 and has a maximum electrical rating of 600 Volts.

Heat Shrink Tubing Set 171 Piece

For insulating wire connectors. Non-flammable polyethylene. 2-18mm diameter, in assorted 30, 60, 90mm and 1m lengths and in assorted colours.

Kennedy® Replacement Blade

To suit Kennedy® cable stripper models: CS16, CS27 and CS28.

Kennedy® Heavy Duty Crimp Tool

Heavy duty crimp tool for uninsulated terminals. Tool steel jaws and manufactured from ductile iron. Capacity: cable lugs: 10mm - 95mm. Aluminium AWG to 4/0. Copper 8WG to 250 MCM.

Model TCU 095

Kennedy® Standard Industrial Terminals - Red Fork

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Kennedy® Standard Industrial Terminals - Red Fork

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.

Kennedy® Cable Tie Gun

Steel jaws grip the cable with trigger action for rapid tightening, tensioning and trimming, ideal for production environments. Capacity: 2.4 to 4.8mm width.

Kennedy® Push-on Piggy Back Terminals

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves.
All disconnect terminals supplied with anti-vibration copper sleeve.

Kennedy® Electrical Components

These Kennedy® Terminal and crimp tool kits contain all the commonly used terminals and connectors in a variety of sizes, with a crimping tool.

Electrical terminal connectors are constructed from the highest quality materials available to ensure a good crimp and connection every time.

552 Piece Heavy Duty Ratchet Crimping tool Kit

Heavy duty 220mm ratchet crimper with a selection of pre-insulated red, blue & yellow electrical connector terminals, cable ties and insulation tape. Ratchet crimper has laminated steel jaws with strengthened PVC handle grips. Suitable for crimping insulated terminals as follows:
Red channel: 0.5 - 1.00mm,
Blue channel: 1.5 - 2.5mm,
Yellow channel: 4.0 - 6.0mm.
Supplied in a fitted case with slide locking clips & handle.

Kit contents:
Heavy duty ratchet crimper
Black insulation tape: 19mm x 9m
Black cable ties: 2.5 x 100mm (50pcs)
Ring connectors:
Red - 3.7mm (14pcs), 4mm (13pcs), 5mm (13pcs).
Blue - 3.7mm (12pcs), 4mm (12pcs), 5mm (12pcs), 6mm (25pcs),
Yellow - 4mm (13pcs), 5mm (12pcs).
Butt connectors: Red (25pcs) - 1.5 x 1.5mm2,
Blue (25pcs) - 1.5 x 2.5mm2.
Push-on spade connectors: - MALE:
Red (25Pcs), Blue (25Pcs) Yellow (12Pcs) - 6.3 x 0.8mm.
Push-on spade connectors: - FEMALE:
Red (25Pcs), Blue (25Pcs), Yellow (12Pcs) 6.3 x 0.8mm.
Push-on spade covered connectors: - FEMALE:
Red (25pcs), Blue (25pcs) - 6.3 x 0.8mm.
Push-on piggy-back connectors: - FEMALE:
Red (25pcs), Blue (25pcs) - 6.3 x 0.8mm.
Bullet connectors: - MALE: Red (25pcs), Blue (25pcs) - 4mm.
Bullet connectors: - FEMALE: Red (25pcs), Blue (25pcs) - 4mm.

Kennedy® Standard Industrial Terminals - Blue Female Socket

Durable low cost copper or brass connectors. Manufactured as single piece connectors. Electro tinned to protect from corrosion. Insulated with flared entry, colour coded vinyl sleeves. All disconnect terminals supplied with anti-vibration copper sleeve.