KEVLAR Gland Packing

Manufactured from KEVLAR Aramid fibres. VK4 is specially treated with a high concentration of resilient, food quality lubricants and heavy PTFE dispersion. VK4, KEVLAR Aramid fibre lube packing, is a durable, economic general service packing for 80% of plant needs. Non-staining lubrication and resilient performance make VK4 ideal for use in the paper industry.
Pressure rating: 150bar.
Rotary speed: 20m/s.
Temperature: -100°C +280°C.
pH range: 1 - 13.
Roll length: 8m.
Never use the product when maximum temperature and pressure are combined.

Type VK4

Vulcan Packing Extractors

Vulcan gland packing extractors are ideal for the removal of old, worn and hardened packing.

The extractors have hardened and tempered steel screws, designed to give maximum penetration into gland material and flexible shafts for removal of packing of any size, even in difficult positions.

Available in two types:
Type TRACC have an integral fixed corkscrew tip.
Type TRACR have replaceable tips for extended life.

Type TRACR Replaceable Tip Packing Extractors

This set of four packing extractors is suitable for use with the following packing sizes:
5-6.5mm (3/16??-1/4??)
8-10mm (5/16??-3/8??)
11-16mm (7/16??-5/8??)
20mm + (3/4?? +)

Pan Fibre Gland Packing

Composite construction of PAN fibres combined with pure carbon fibres. Self-lubricating with superior packing properties - enhanced by graphite impregnation and high temperature lubricants, practically eliminates shaft scoring. Conformable packing, with a square, inter-braid, lattice construction, which improves sealing with less gland pressure.
Applications: Suitable for most plant applications and able to replace and outperform traditional graphited asbestos, glass fibre and natural fibre packing.
Suitable for use against oils, water,
steam, solvents and general chemicals.
Operational limits
Pressure rating: 80bar
Rotary speed: 10m/s
Temperature: -50C + 250C
pH range: 4-12
Roll length: 8m

Type VG2

Packing Extractors

With Hardened and tempered steel screws, designed to give maximum penetration into gland material and flexible shafts for removal of packing of any size, even in difficult positions. Type "TRACC" have and integral tip corkscrew tip, type "TRACR" have replaceable tips for extended life.

Type TRACC - Integral Tip

Graphite Gland Packing - PTFE

VP2 packing is manufactured from 100% Type G1 fibre. Constructed from PTFE tape and graphite inter-locked to create a true synergy between these two premier packing materials. VP2 resists all chemicals across the entire Ph range (except Oleum, Aqua, Regia, fuming Nitric Acid and Fluorine), is self lubricating and does not shrink, harden nor dry out.
Pressure rating: 120bar.
Rotary speed: 25m/s.
Temperature: -200°C +280°C.
pH range: 0 - 14.
Roll length: 8m.
Never use the product when maximum temperature and pressure are combined.

Type VP2

Pan Fibre Gland Packing

VT2 is braded from pure Poly Acrylic Nitrile (PAN) impregnated with PTFE, further treated with special lubricants. Gives enhanced performance without shaft wear problems or high costs of traditional synthetic fibre packing. Extended life even at high shaft speeds and pressures within a wide pH and temperature range.
Applications: Pumps, valves, mixers, reactor vessels and reciprocating applications. Resistant to general chemicals, solvents, oils, water and steam. For use in arduous conditions in process applications where alternative packing causes excessive wear or require frequent maintenance and replacement. Does not contaminate or stain - suitable for use in the food, water and paper industries.
Operational limits
Pressure rating: 100bar
Rotary speed: 18m/s
Temperature: -40C +250C
pH range: 2-14
Roll length: 8m

Type VT2

Packing Extractors

With Hardened and tempered steel screws, designed to give maximum penetration into gland material and flexible shafts for removal of packing of any size, even in difficult positions. Type "TRACC" have and integral tip corkscrew tip, type "TRACR" have replaceable tips for extended life.

Type TRACC - Integral Tip

Pan Fibre Gland Packing

Composite construction of PAN fibres combined with pure carbon fibres. Self-lubricating with superior packing properties - enhanced by graphite impregnation and high temperature lubricants, practically eliminates shaft scoring. Conformable packing, with a square, inter-braid, lattice construction, which improves sealing with less gland pressure.
Applications: Suitable for most plant applications and able to replace and outperform traditional graphited asbestos, glass fibre and natural fibre packing.
Suitable for use against oils, water,
steam, solvents and general chemicals.
Operational limits
Pressure rating: 80bar
Rotary speed: 10m/s
Temperature: -50C + 250C
pH range: 4-12
Roll length: 8m

Type VG2

Pan Fibre Gland Packing

VT2 is braded from pure Poly Acrylic Nitrile (PAN) impregnated with PTFE, further treated with special lubricants. Gives enhanced performance without shaft wear problems or high costs of traditional synthetic fibre packing. Extended life even at high shaft speeds and pressures within a wide pH and temperature range.
Applications: Pumps, valves, mixers, reactor vessels and reciprocating applications. Resistant to general chemicals, solvents, oils, water and steam. For use in arduous conditions in process applications where alternative packing causes excessive wear or require frequent maintenance and replacement. Does not contaminate or stain - suitable for use in the food, water and paper industries.
Operational limits
Pressure rating: 100bar
Rotary speed: 18m/s
Temperature: -40C +250C
pH range: 2-14
Roll length: 8m

Type VT2

Pan Fibre Gland Packing

Composite construction of PAN fibres combined with pure carbon fibres. Self-lubricating with superior packing properties - enhanced by graphite impregnation and high temperature lubricants, practically eliminates shaft scoring. Conformable packing, with a square, inter-braid, lattice construction, which improves sealing with less gland pressure.
Applications: Suitable for most plant applications and able to replace and outperform traditional graphited asbestos, glass fibre and natural fibre packing.
Suitable for use against oils, water,
steam, solvents and general chemicals.
Operational limits
Pressure rating: 80bar
Rotary speed: 10m/s
Temperature: -50C + 250C
pH range: 4-12
Roll length: 8m

Type VG2