Dronco Cutting Discs

The special line for craftsmen and industrial applications. Due to the fact that different materials impose different demands, DRONCO produces discs especially matching the respective material. Special types of corundum and bonds are combined to suit the task in hand. This optimises performance, extends service life, increases efficiency and reduces cutting time. Manufactured according to EN 12413. Complies to oSa regulations.

Dronco Inox Cutting Discs

Characteristics: This very thin disc (1.0 mm) enables you to achieve a uniquely clean cut in the shortest possible time while using a minimum of force. Precise to the millimetre, vibration-free cutting, no thermal bluing and no burring. Field of Application: Thin sheet metal (of the type used in car bodies and the tank construction sector), steel cable, thin-walled profile sections and pipes made of stainless steel and non-ferrous metals. Composite materials (FRP).Max. operating speed: 13280 r.p.m.

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Type 27 Depressed Centre Grinding

For use with all portable angle grinders. Not to be used for wet grinding. Optimum angle for use 25° to 35°. Grade A30/AS30 - for general purpose use on metals. INOX - for use on Stainless steel (iron, chlorine and sulphur free).

Norton Abrasives

Advanced grain and bond system for longer life and quicker cutting. Suitable for steel and stainless steel applications. Free from iron, sulphur and chloride. For use with portable angle grinders. Type 41 (flat).

Type 41 Ultra Thin Cut Off Discs

Norton Depressed Centre Reinforced Cutting & Grinding Discs

A range of discs for all angle-grinding of both metal (aluminium oxide) and stone (silicon carbide).

Norton Abrasives

High performance chop saw wheels with an advanced grain and bond system for longer life and quicker cutting. Internally reinforced for straighter burn and burr free cutting. Designed for small electrical table and fixed machines. For use in the fabrication, foundry and constrution industries. Type 41 (flat).

Type 41 Chop Saw Wheels

Norton Depressed Centre Reinforced Cutting & Grinding Discs

A range of discs for all angle-grinding of both metal (aluminium oxide) and stone (silicon carbide).

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Type 42 Depressed Centre Cutting Discs

For use with all portable grinders/cut-off machines. Not to be used for grinding. Grade A24 - for general-purpose use on metals.

Norton Depressed Centre Reinforced Cutting & Grinding Discs

A range of discs for all angle-grinding of both metal (aluminium oxide) and stone (silicon carbide).

Kennedy® Depressed Centre and Flat Reinforced Grinding Discs

All Kennedy Depressed Centre and Flat Reinforced Cutting wheels now carry the "oSa" (The Organisation for the Safety of Abrasives) mark of approval. "oSa" is an association of the world's leading abrasives manufacturers. In France, it is mandatory to use only oSa-certified rough grinding wheels and cutting wheels. Similarly in Germany and Italy, it is strongly recommended that abrasive products conform to the relevant EN standards. "oSa" marked products are guaranteed to meet or exceed the highest worldwide safety standards, including those of the Comite Europeen de Normalisation (CEN), the European standards body that issues EN standards, and of ANSI in the USA.

Type 27 Depressed Centre Grinding

For use with all portable angle grinders. Not to be used for wet grinding. Optimum angle for use 25° to 35°. Grade A30/AS30 - for general purpose use on metals. INOX - for use on Stainless steel (iron, chlorine and sulphur free).

Rasta Depressed Centre & Flat Profile Cutting & Grinding Discs

For use with all portable machines. Not to be used for freehand or wet grinding. Type 27 Depressed Centre Portable Grinding Discs. Type 42 Depressed Centre Portable Cut-Off Discs. Type 41 Flat Portable Cut-Off Discs.

Type 41 Ultra Thin Metal/Inox AA46 T (C45) Cutting

For steel/stainless steel. Thin sheet applications. Comfortable cutting, Burr-free cutting result. High stability. Free of iron, sulphur and chlorine. Made of semi-precious corundum. Box quantity 25.