SIP® Trade Airmate Nimbus 25 Compressor

06233
230v (13amp) supply.
Heavy-duty 2hp motor and pump for prolonged use.
24L air receiver.
8CFM piston displacement.
118psi (8bar) max pressure.
Efficient cooling system.
Oil lubricated.

Kobe™ "Oil-Free" Compressors

These Direct Drive oil-free compressors are built of quality materials to ensure trouble free use and can be run on a normal 240v domestic supply. Robust in manufacture, they all come with a pressure cut-off switch, fully automatic stop/start control, tank and line pressure gauges and an air outlet regulator.

2HP 23Ltr Compressor

These two compressors share the same robust 2HP direct drive motor producing an 8Bar/115psi working pressure and an air supply of 8CFM/230Ltr/min which is enough to run most air tools.

SIP Airmate Oil Lubricated Compressors

Oil lubricated for longer life, featuring heavy duty pump, cast iron barrel, industrial quality air filter, heavy duty non-return valves and twin threaded outlets and gauges. Tough plastic casing with integral handle providing protection and manoeuvrability. They run from a standard 230V domestic supply, making them ideal for DIY or trade users. The automatic stop/start control, pressure regulator and gauge make them safe and convenient to use. Efficient cooling system. Tanks conform to full EC directives. Compact in design, easy to store and ideal for powering: Air Brushes, Lower/Duster Guns, Air Caulking Guns, Air Degreasing Guns, Air Grease Guns, Inflating Guns, Air Nailer/Staplers, Air Riveters, Spray Guns etc.

Airmate TN 3/50-D

06242
Oil lubricated. 2.5HP induction motor, 230V, 50Hz (13amp) supply.
50 litre air receiver.
Piston displacement 9.5CFM, max. pressure 8 bar.

SIP Professional proTECH Direct Drive Compressors

Professional direct drive compressors for tough use. Two year warranty on all proTECH compressors. A range of innovative compressors delivering quality, reliability and safety. All models are compact and highly portable making them ideal for outdoor use. Larger than normal gauges ensure ease of reading and the ergonomic pressure reducer knobs have handy snap-to" adjustment.

06256 110 Airmate OL197/10RC

Specifications:
Oil-free. 1.5HP motor, 110V supply.
10 litre air receiver.
Ideal for nailer/staplers.
Piston displacement 8.0CFM, maximum pressure 10 bar.

Kobe™ "Oil-Free" Compressors

These Direct Drive oil-free compressors are built of quality materials to ensure trouble free use and can be run on a normal 240v domestic supply. Robust in manufacture, they all come with a pressure cut-off switch, fully automatic stop/start control, tank and line pressure gauges and an air outlet regulator.

2HP 46Ltr Compressor

These two compressors share the same robust 2HP direct drive motor producing an 8Bar/115psi working pressure and an air supply of 8CFM/230Ltr/min which is enough to run most air tools.

SIP Airmate Oil Lubricated Compressors

Oil lubricated for longer life, featuring heavy duty pump, cast iron barrel, industrial quality air filter, heavy duty non-return valves and twin threaded outlets and gauges. Tough plastic casing with integral handle providing protection and manoeuvrability. They run from a standard 230V domestic supply, making them ideal for DIY or trade users. The automatic stop/start control, pressure regulator and gauge make them safe and convenient to use. Efficient cooling system. Tanks conform to full EC directives. Compact in design, easy to store and ideal for powering: Air Brushes, Lower/Duster Guns, Air Caulking Guns, Air Degreasing Guns, Air Grease Guns, Inflating Guns, Air Nailer/Staplers, Air Riveters, Spray Guns etc.

Airmate TN 3/100-D

06244
Oil lubricated. 2.5HP induction motor, 230V, 50Hz (13amp) supply.
100 litre air receiver.
Piston displacement 9.5CFM, max. pressure 8 bar.

SIP Trade 24 Litre Portable Air Tank

06298 - Stand Alone
24 litre air receiver, a convenient and portable supply of stored air. Ideal for when it is not possible to use a compressor - just load the receiver and take it with you. Complete with pressure gauge.

SIP Professional proTECH Belt Drive Compressors

Professional belt drive. Two year warranty on all proTECH compressors. This range uses extra hard wearing slow running pumps with after coolers to provide resistance to wear and long lasting reliability. An oversized crankcase futher improves lubrication. These machines are ideal for heavy, continuous use - the right choice for professional and industrial applications. Slow running. Strong plastic belt guard. Big wheels - for better mobility around the workshop.

06286 Airmate PNB3800B4/150

Specifications:
1 phase 4.0HP motor, 230V (16amp) supply.
150 litre air receiver.
Piston displacement 18.0CFM, max. pressure 10 bar.

SIP Airmate "Oil-Free" TN1.5/25-O (10 Bar) Compressor

06236
This compressor is light, easy to transport and has an oil-free pump unit entirely made of die-cast aluminium requiring no maintenance. Stainless steel valves. Extra large wheels and extra long handle. Oil-free operation provides clean air - ideal for spraying. No risk of oil spillage, even when the machine is laid on its side in a car boot for example. Designed for ease of use - ideal for DIY and trade users. Strong plastic covers to protect all internal parts. Tank conforms to full EC directives.

Specifications:
Input power: 230V 50Hz.
Piston displacement: 7CFM.
Fuse rating: 13amp.
Motor: 1.5HP - brush.
Low noise operation: 66dBA.
Receiver tank size: 24L.
Max. pressure: 10 bar.

SIP Professional proTECH Belt Drive Compressors

Professional belt drive. Two year warranty on all proTECH compressors. This range uses extra hard wearing slow running pumps with after coolers to provide resistance to wear and long lasting reliability. An oversized crankcase futher improves lubrication. These machines are ideal for heavy, continuous use - the right choice for professional and industrial applications. Slow running. Strong plastic belt guard. Big wheels - for better mobility around the workshop.

06278 Airmate PB3800B/150S

Specifications:
3.0 hp motor, 230V (13amp) supply.
150 litre air receiver.
Piston displacement 14.0CFM, max. pressure 10 bar.