Cemont Type 17V TIG Torch

For use with power source model number TX150DC illustrated.

Professional DC Tig Inverter Power Source

Smarty 220XL



Portable generator for TIG welding at direct current,
for professional use. Can serve many applications thanks mainly to the ?pulse? function for working thin surfaces and
?2 current levels? for work in position. The station uses
70m primary cables.
Specifications:
Power supply: 230V (single-phase 12A)
No load voltage: 50V
Current range: 5 - 220A
Duty cycle at 40C:
35/30/100%
220/180/150A
Protection class: IP23.
Dimensions: 205 x 345 x 460mm

Cemont Portable Professional MMA/Tig Inverter Power Source

Heavy duty single phase inverter MMA/Touch Tig machine, for general purpose use. Features include robust front and rear profiles in tough ABS plastic to protect from accidental damage, hot start and anti-stick device. This machine is ideal for maintenance and on site fabrication.

Specifications:
Welding current range: 5 - 130amps.
Duty cycle: 50%: 125amps.
Weldable electrodes: 1.6 - 3.25mm.
240V single phase.
2 year warranty.
Dimensions (L x W x H): 145 x 235 x 340mm.
Weight: 7.7kg.

Puma S1400 Portable Professional MMA/Tig Inverter Power Source (Replaces S1401)

Cemont Type 9V TIG Torch

For use with power source model number S1400 illustrated.

Puma Power 2000



2000

A heavy duty single phase inverter MMA/scratch start machine
with protection for use with power generators
Welding current range: 5 - 180amps.
Duty cycle @ 60% 140amps.
Weldable electrodes 1.6 - 4.0mm.
Dimensions (L x W x H): 162 x 265 x 385mm.
Weight: 9kg.

Puma Power 1700



1700

A heavy duty single phase inverter MMA/scratch start T.I.G. machine with protection for use with power generators.
Welding current range: 5 - 160amps.
Duty cycle @ 60% 140amps.
Weldable electrodes 1.6 - 4.0mm.
Dimensions (L x W x H): 162 x 265 x 385mm.
Weight: 9kg.

Smarty TX160Alu

Heavy-duty single-phase inverter AC/DC T.I.G. / M.M.A. machine, for general-purpose use. Features include robust ABS plastic case to protect from accidental damage, T.I.G. pulsing on DC, wave balance and frequency control on AC, H.F. start, slope out, 2/4 latching, remote facility, hot start and Anti stick device. Simple controls for welding cycle control for post gas, down slop and post gas. Ideal for production, maintenance and on site fabrication.
Input Voltage: 240 volt 16amp
Welding Current Range: 5-150amps
Duty Cycle: 120amps @ 60%
Supplied with: TIG Torch, Earth lead, and Regulator
Optional Foot Pedal Available