Kennedy Welding Helmets

The Kennedy Jet Black Auto-X? welding helmet automatically protects the operator from eye injuries, caused by weld arc and also leave both hands free when welding. The helmet is equipped with two photo sensors that sense arc light, these automatically switch the filter from shade 4 (transparent prior to welding to enable the operator to observe the work piece clearly) as soon as the Arc is struck the filter darkens automatically with immediate effect to the to pre-selected shade 8, 9, 10, 11, 12, or 13. When the arc goes out, the filter will become transparent again.

The switching time from light to dark is approximately 0.0001 seconds, and the switching time from dark to light can be set at between 0.1 - 0.6 second.

The Kennedy Jet Black Auto-X? mask provides complete protection against UV/IR to DIN15 even in transparent mode and is dual powered by 2 lithium batteries and a solar panel with two sets of photo sensors to sense arc light. The outer shell of the helmet is manufactured from a high polymer thermostable material that is spatter resistant to ensure a long service life.

Jet Black Auto-X? Automatic Welding Helmet

Kennedy Jet Black Auto-X? helmet specification:

Filter dimensions: 110 x 90 x 7mm
View area: 98 x 42mm
Light shade number: 4
Dark shade number: 8 to 13
UV/IR protection: DIN 16
Time from light to dark: 0.0001s
Time from dark to light: 0.1 - 0.6s
Dual power supply solar panel and battery: 2 x 3V CR2032 lithium batteries provide power for approximately 800 hours working.
Operating temperature: -5C - 55C (23F - 131F)
Storing temperature: -20C - 65C (-4F - 149F)
Weight: 480g

For the full range of gas, Tig, Mig & Arc welders, consumables and protective clothing please refer to our catalogue.

Kennedy Personal Protection Safety Spectacles

Kennedy Personal Protection safety eyewear provides protection to suit your specific requirement from traditional safety spectacles to the advanced flame resistant goggles, Kennedy Personal Protection has it all!

Viper? Safety Spectacles

Kennedy Personal Protection Viper? safety spectacles are for low energy impact protection. They have a single piece polycarbonate wrap around lens for an unrestricted field of vision, side shields provide lateral protection from impacts, and a scratch resistant coating extends the working life of the lens.

A soft non-allergenic nose bridge and side arms with four adjustment positions helps to ensure a comfortable fit. The inclination of the lens can also be adjusted to ensure your eyes are fully protection, no matter what angle your viewing your work at!
Viper? Safety Spectacles provide UV protection against electrical arc discharges caused by a short circuit.

Class 1 optical quality for distortion-free continuous use.
CE approved to EN166 F.

Accessories available:
They can be used with a neck cord. Order code: KEN-960-9620K.
Spring shut black spectacle case. Order code: KEN-960-9560K.

Kennedy Personal Protection Safety Goggles

Kennedy Personal Protection safety eyewear provides protection to suit your specific requirement from traditional safety spectacles to the advanced flame resistant goggles, Kennedy Personal Protection has it all!

Lion? Acetate Lens Anti-Mist/Scratch Resistant Safety Goggles

Kennedy Personal Protection Lion? safety goggles, protect against UV radiation and low energy impacts at high ambient environmental temperatures. The Acetate lenses have a scratch resistant and anti-mist coating to protect and preserve the optical clarity of the lens, to extend their working life.

Lion? safety goggles are ergonomically designed with a soft anatomically correct fitting shaped PVC frame that adapts to comfortably fit the face. The nose bridge is raised above the lens on the outside of the goggle to provide extra protection from scratching when the goggles are placed face down on any surface. The large lens allows an unrestricted field of peripheral vision and has built-in brow and cheek protection. The goggles are securely and comfortably held in place by a wide hypoallergenic elasticated headband. The lens can be replaced as and when required: Replacement acetate lens order code: KEN-960-8110K.

Lion? goggles will fit over most prescription glasses.

Class 1 optical quality for distortion-free continuous use.

WARNING:

WHEN WORN OVER PRESCRIPTION GLASSES, THE IMPACT ENERGY MAYBE TRANSMITTED FROM THE GOGGLES TO THE PRESCRIPTION GLASSES.

Soft Spectacle Case

Soft spectacle case with spring opening.

Safety goggles

Suitable for foundry work. Medium energy impact protection at extreme environmental temperatures. Flame resistant lens, frame and headband. Anti-scratch coating for a longer lens life. Replaceable, clear and flexible 2mm thick polycarbonate lens. Anti-mist treatment on both sides of the lens. Can be fitted over most prescription glasses. Class 1 optical quality for distortion free continuous use. Resistance to molten metals and hot solids. Built-in brow and cheek protection. Soft anatomically shaped thermoplastic rubber frame adapts to all faces. Raised nose bridge for extra lens protection when placed face down. Large peripheral viewing area. Wide anallergenic elasticated headband. Replacement clear polycarbonate lens KEN-960-8120K.

WARNING: WHEN WORN OVER PRESCRIPTION GLASSES, THE IMPACT ENERGY MAY BE TRANSMITTED FROM THE GOGGLES TO THE PRESCRIPTION GLASSES.

Condor

Kennedy Welding Helmet

The Kennedy Automatic Variable Shade Welding Helmet automatically protects the operator from eye injuries caused by weld arc, leaving both hands free. The helmet is equipped with two sets of photo sensors to sense arc light, these switch the filter from shade 4 to the to pre-selected shade 9, 10, 11, 12, or 13 in just 0.5ms. As the helmet is powered by an integral solar panel no bulky batteries are required which reduces the weight and size of the helmet and ensures that the helmet always has power when you need it. The filter provides permanent UV/IR protection up to DIN 15 whilst in use. Any of the five welding shades can be easily selected using the side mounted adjustment dial. The Kennedy welding helmet shell is certified to DIN EN 169 and DIN 179 and is suitable for Arc & Mig/Mag welding only.

(Spare cover lenses to protect the liquid crystal cartridge unit are available to order, inner CTL8857983K, outer CTL8857983E. Supplied in packs of 10)

HAS413 Automatic Variable Shade Welding Helmet