产品 / 切削工具 / 铣刀
编号：KEN0623560K
●产品描述：
Kennedy Endmills
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.
TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.
TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.
For all technical and dimensional specifications please refer to our catalogue.
*Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.
KC3 Endmill Long Series 3* Flute Throwaway Cutter Weldon Shank HSS-Co 5% TiN Coated - Inch
编号：KEN1616200K
●产品描述：
Kennedy® Milling Cutters Plain Shank Carbide Micrograin
4 Flute
Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Works Standards.
For all dimensional and technical specifications please refer to our catalogue.
Regular Series 4 Flute End Mills - Metric
编号：KEN0623020K
●产品描述：
Kennedy Endmills
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.
TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.
TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.
For all technical and dimensional specifications please refer to our catalogue.
*Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.
KC3 Endmill Long Series 3* Flute Throwaway Cutter Weldon Shank HSS-Co 5% TiN Coated - Metric
编号：KEN1619220K
●产品描述：
Kennedy® Long Series Slot Drills Plain Shank Carbide Micrograin
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non ferrous and other soft materials. Manufactured to USCTi Standards.
For all dimensional and technical specifications please refer to our catalogue.
Long Series 4 Flute Slot Drills - Metric
Centre cutting as standard. For maximum strength when milling harder materials where rapid swarf removal is not needed. 4 flute milling cutters have one of the strongest tooth structures available in solid cutters. Manufactured to Ansi Standards.
Inch Tolerances
Nominal Limits Of Tolerance
Diameter High Low
1/16 - 1/4 0.000 -0.002
17/64 - 1 0.000 -0.003
Metric Tolerances
Nominal Limits Of Tolerance
Diameter High Low
1 - 6 0.000 -0.050
7 - 25 0.000 -0.080
Long Series
编号：KEN1610180K
●产品描述：
Kennedy® Milling Cutters Plain Shank Carbide Micrograin
2 Flute
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to Works Standards.
For all dimensional and technical specifications please refer to our catalogue.
Regular Series 2 Flute Slot Drills - Metric
编号：KEN0625040K
●产品描述：
Kennedy Endmills
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.
TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.
TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.
For all technical and dimensional specifications please refer to our catalogue.
*Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.
KC3 Endmill Short Series 3* Flute Throwaway Cutter Weldon Shank HSS-Co 5% TiCN Coated - Metric
编号：KEN0620155K
●产品描述：
Kennedy Endmills
Kennedy KC3 throwaway 3* flute endmills are manufactured HSS-Co 5% making them much tougher than HSS. This means that Kennedy endmills can be used at higher speeds and feeds which in turn gives greater productivity.
Kennedy KC3 endmills are available uncoated, TiN coated and TiCN coated.
TiN (Titanium nitride) provides a surface hardness in the region of 2300HV which offers improved wear resistance, tool life and productivity.
TiCN (Titanium Carbonitride) gives a surface hardness in the region of 3000-3500 HV, excellent wear resistance and good heat resistance. This coating is used for the same things as TiN but also for hard steels, stainless, cast iron, brass & bronze.
For all technical and dimensional specifications please refer to our catalogue.
*Except: 1mm cutters, 2mm and 1/16" ball nose cutters, all of which have two flutes.
KC3 Endmill Short Series 3* Flute Throwaway Cutter Weldon Shank HSS-Co 5%
编号：KEN1610600K
●产品描述：
Kennedy® Milling Cutters Plain Shank Carbide Micrograin
2 Flute
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to Works Standards.
For all dimensional and technical specifications please refer to our catalogue.
Regular Series 2 Flute Slot Drills - Inch
编号：KEN1619780K
●产品描述：
Kennedy® 2 Flute Milling Cutters for Aluminium Carbide Al-Karb Ultrafine Micrograin
Centre cutting as standard. An advanced tool geometry designed for cutting aluminium and other non-metallic, non-ferrous materials requiring high machining rates. Al-Karb cutters will out-perform conventional end mills on these materials as the flute design allows maximum chip removal.Short Series
Short Series 2 Flute - Metric
编号：KEN1610200K
●产品描述：
Kennedy® Milling Cutters Plain Shank Carbide Micrograin
2 Flute
For optimum performance and maximum swarf removal when plunging, slotting and routing in light alloys, brass, aluminium, non-ferrous and other soft materials. Manufactured to Works Standards.
For all dimensional and technical specifications please refer to our catalogue.
Regular Series 2 Flute Slot Drills - Metric