PTFE FG H1 Food Grade High Temperature PTFE Release Agent

Wide temperature range -40 C to +260C. PTFE is a fine grade powder carried in fast evaporating solvent, when applied to metal surfaces exceptional release and lubricating qualities are imparted. Clean non toxic no odour ideal for use in extreme pressure situation on conveyors, shutes and slides. Also suitable as anti galling agent on fasteners and fixings. PTFE Food Grade can be used as a general lubricant in all food preparation areas. Lubricates the exterior of cables to allow for easy installation in conduit. Holds H1 approval from InS. Size 500ml.

Ambersil FG Penetrating Oil





NSF H1 registered penetrant for seized parts.
Frees metal parts seized by dirt,rust,corrosion or dried up greasy deposits.

Food Safe Anti-Seize Paste

Formulated for use on assemblies in difficult areas where fretting corrosion and corrosion induced by wet environments occur. It can also be use to lubricate slow moving slides and pivot pins. Resistant to hot, cold and salt water it can be used across a wide temperature range where the solid lubricate including PTFE gives excellent dry lubrication and forms a barrier between all surfaces. Non-toxic, it complies with FDA regulations and is H1 registered.

Ambersil Moisture Remover FG

Developed for the food industry to remove moisture from equipment, bearings and electronics.
A blend of mineral oils and innovative solvents quickly drive out moisture from treated parts, leaving behind a thin, protective film, combating corrosion.
NSF H2 registered (No.142299).

Food Safe Hydraulic Oils

Designed for use in areas where incidental contact may occur, these oils are based on high quality synthetic grade oils, compounded with state of the art anti-corrosion and EP substances. Non-toxic, they comply with FDA regulations and are InS H1 registered.

Food Safe Hydraulic Oil Grade G32

Solent Food Safe Penerating Oil

Penetrating oil for dismantling, lubricating and cleaning. This odourless oil is tasteless and displaces water leaving a hydrophobic coating to protect surfaces from corrosion.
It penetrates threads and crevices to release and lubricate delicate mechanisms, pivot points and sliding surfaces whilst degreasing hard surfaces. Can be used as a light lubricate.
CAUTION: Pressurised container. Protect from sunlight. Do not expose to temperatures exceeding 50C.
Do not pierce or burn even after use.
Do not spray on a naked flame or any incandescent material.

Food Safe Compressor Oils

These compressor oils are fully synthetic, comply with FDA regulations and are H1 registered. Designed for use in food production and pharmaceutical industries they have a low friction coefficient reducing wear and energy comsumption. They reduce residue, varnish and scum build up which leads to lower maintenance costs, downtime and loss of productivity.

Food Safe Comp Tech Oil G68 grade

Food Safe Degreaser

This H1 registered all-purpose cleaner/degreaser is designed for food production areas where incidental contact may occur. It is non abrasive, non chlorinated, water clear, low odour, fast evaporating, it leaves no residue or deposits behind. It can be safely used on machinery, worktops and floors.

Rocol Foodlube Spray

High performance versatile lubricant spray for all round light to medium lubrication of most moving parts including small bearings and slides. Temperature range - 10C to 100C. NSF H1 registered.

Ambersil Chain Lube FG - With PTFE

A foaming chain lubricant with added PTFE. Specifically designed to provide convenient, effective lubrication and protection in applications where incidental food contact may occur or in applications where a clean lubricant is preferred. The gentle foaming action assures an excellent penetration and prevents against dripping. NSF H1 registered. Meets USDA 1998 H1 guidelines for use as a lubricant with incidental food contact. Operating temperature from -15C to 175C. Contains PTFE, which helps reduce friction and wear. Virtually odourless and colourless. Controlled application with gentle foaming action. 400ml aerosol.