产品 / 轴承 & 滚轴 / 滚珠轴承
| 品牌 |
|
编号：SNQ6712820T
●产品描述：
SNR Deep Groove Ball Bearings
With Shields
编号：NTN6718010J
●产品描述：
Thrust Ball Bearings
Thrust Bearings are designed primarily to support axial loads at contact angles between 30° and 90°. Just as with radial bearings, these bearings differ according to the type of rolling element they use. With thrust bearings, it is necessary to supply an axial preload in order to prevent slipping movement between the bearing's rolling element and raceways.
Comprising of caged ball bearing element and pair of shaft housing washers (bearing shaft washer and housing washer, and the normal contact angle is 90°. Axial loads can be supported in only one direction, radial loads cannot be accommodated. Spherical roller and needle roller versions are also available.
编号：SNQ6714070L
●产品描述：
Narrow Series Deep Groove Ball Bearings - C3 Clearance
Slightly narrower than the 6000 series with the same bore and outside diameter. Designed to withstand radial loads, withstand axial loads in both directions and operate at high speeds of rotation.
编号：SNR6714455D
●产品描述：
Self-Aligning Ball Bearings
2200 & 2300 Series self-aligning ball bearings are double row with a concave raceway to allow approximately 4° of misalignment. These are cylindrical type but are also available with seals & taper bore for use with adaptor sleeves.
Taper Bore
编号：SNR6714550G
●产品描述：
Self-Aligning Ball Bearings
2200 & 2300 Series self-aligning ball bearings are double row with a concave raceway to allow approximately 4° of misalignment. They have a tapered bore for use with adaptor sleeves. There are also a range of sealed versions available.
Taper Bore
编号：SNR6701720J
●产品描述：
SNR Deep Groove Ball Bearings
Rubber seals inserted into the outer raceway and in contact with the inner race providing protection against the ingress of moisture, dust and other foreign objects.
Sealed Deep Groove Ball Bearings
Dimensions to IS015
编号：SNR6714120T
●产品描述：
Self Aligning Bearings
With double ball rows and a spherical raceway in the outer ring, self-aligning ball bearings can compensate for installation errors or shaft misalignment. Useful for applications requiring high rotating speeds while exercising moderate radial, and moderate or low axial loading. Available in cylindrical bore or taper bore (K suffix). Clearance is standardised (ISO 5753). The values are different for cylindrical bore and tapered bore bearings (suffix K). The latter have a significantly larger clearance to allow the reduction in clearance resulting from the adapter sleeves interference fit.
Self Aligning - Plain Bore
编号：SNQ6712010L
●产品描述：
SNR Bearings
SNR double-row ball bearings have become the natural substitute for single-row ball bearings for higher radial load applications, or for axial loads in both directions. Suitable for mean rotating speeds, these bearings only admit very slight misalignment between shaft and housing, to the order of 0.06.
Standard synthetic material cage.
Applications: electrical motors, household appliances, wood-machine spindles, small reduction gears.
4200 Series Double Row Radial Contact Ball Bearings
编号：SNR6714530J
●产品描述：
Self Aligning Bearings
With double ball rows and a spherical raceway in the outer ring, self-aligning ball bearings can compensate for installation errors or shaft misalignment. Useful for applications requiring high rotating speeds while exercising moderate radial, and moderate or low axial loading. Available in cylindrical bore or taper bore (K suffix). Clearance is standardised (ISO 5753). The values are different for cylindrical bore and tapered bore bearings (suffix K). The latter have a significantly larger clearance to allow the reduction in clearance resulting from the adapter sleeves interference fit.
Self Aligning - Taper Bore
编号：SNR6701681A
●产品描述：
Deep Groove Ball Bearings - C3 Clearance
C3 bearings have an additional internal radial clearance to cope with high speed environments where excess heat is generated.
Open type:
Without seals to allow for the free circulation of either oil or grease.