产品 / 切削工具 / 铰刀
编号：SHR0652143W
●产品描述：
Sherwood Straight Shank Parallel Hand Reamers
Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.
Spiral Flute Parallel Hand Reamers - Metric
For all dimensional specifications please refer to our catalogue.
编号：SHR0652213P
●产品描述：
Sherwood Machine Reamers
Left hand spiral flute, right hand cutting. Manufactured to BS 122.
For all dimensional specifications please refer to our catalogue.
Inch
编号：SHR0652298A
●产品描述：
Sherwood Machine Reamers
Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head.
Conform to BS 122 : Part 2 and BS 328 Part 4.
For all technical and dimensional specifications please refer to our catalogue.
Machine Reamers Taper Shank HSS - Inch
编号：SHR0652764Q
●产品描述：
Sherwood Hand Reamers
Sherwood Taper Pin hand reamers are used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies.
Manufactured to BS 328 : Part 4 : 1990 and DIN 9A.
For all technical and dimensional specifications please refer to our catalogue.
Taper Pin Hand Reamers - Inch
编号：SHR0652147A
●产品描述：
Sherwood Straight Shank Parallel Hand Reamers
Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.
Spiral Flute Parallel Hand Reamers - Metric
For all dimensional specifications please refer to our catalogue.
编号：SHR0652810L
●产品描述：
Sherwood Hand Reamers
Sherwood Taper Pin hand reamers are used to produce a close tolerance surface finish in taper holes to allow the fitting of hardened and ground taper pins in the building of jigs, fixtures and dies.
Manufactured to BS 328 : Part 4 : 1990 and DIN 9A.
For all technical and dimensional specifications please refer to our catalogue.
Taper Pin Hand Reamers - Metric
编号：SHR0652408L
●产品描述：
Sherwood Machine Reamers
Sherwood machine reamers are used to produce a close tolerance surface finish by enlarging pre-drilled holes to a finished size. Manufactured from HSS with a 45 bevelled head.
Conform to BS 122 : Part 2 and BS 328 Part 4.
For all technical and dimensional specifications please refer to our catalogue.
Machine Reamers Taper Shank HSS - Metric
编号：SHR0652224E
●产品描述：
Sherwood Machine Reamers
Left hand spiral flute, right hand cutting. Manufactured to BS 122.
For all dimensional specifications please refer to our catalogue.
Metric
编号：SHR0652035B
●产品描述：
Sherwood Straight Shank Parallel Hand Reamers
Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.
Spiral Flute Parallel Hand Reamers - Inch
For all dimensional specifications please refer to our catalogue.
编号：SHR0652050S
●产品描述：
High Speed Steel Straight Shank Spiral Flute Parallel Hand Reamer
Used to produce a close tolerance surface finish by hand in almost any environment i.e. on site or in a workshop. Manufactured to BS 328 : Part 4 : 1990 and DIN 206B.
Imperial Limits of Tolerance Diameter \t Over\tUp to and Including\t High \t Low -\t0.1181 \t0.0003\t0.00010.1181\t0.2362\t 0.0004\t0.00020.2362\t0.3937 \t0.0005\t0.00020.3937\t0.7087 \t0.0006\t0.00030.7087\t1.1811 \t0.0007\t0.00041.1811\t1.9685 \t0.0008\t0.00041.9685\t3.1496 \t0.0010\t0.0005