Fixed Round Bollards

Surface mounted or excavated bollards offer permanent restriction of access and protection for buildings. Fixed bollards can be supplied with locating eyes to enable chains to be attached for boundary demarcation.

Surface

Section Size: 89mm
Above Ground: 910mm

SitecopPlus

SitecopPlus is designed to be less severe while still producing effective speed reduction. This makes it ideal for retail sites, service roads, distribution centres, industrial estates and residential areas. SitecopPlus is suitable for HGVs and requires a 50mm diameter reinforcing tube.

Soft and quiet: 'Soft' but effective feel compared to conventional speed restrictors, providing 'quiet' traffic calming.
High visibility: High visibility with moulded-in reflective arrow markings.
Easy installation: Quick and easy to install and can be relocated if necessary.
Internal strength: A scaffold pole (diameter 50mm) is always required for strength and alignment.
Modular design: The design consists of middle units 500mm wide and caps 250mm wide.
Environmental: Manufactured from hard wearing recycled rubber.

Vehicle Stoppers

Easy installation: Bolt down product requiring no excavation.
Health & safety: Weight less than 25kg for manual handling.
High visibility: Yellow marking providing high visibility.
Relocatable: For multi or temporary use.

Kerb Separator

Fixings: 4.
Weight: 10kg.

Folding Posts

Manufactured from high quality steel. Suitable for restricting parking and controlling access. Each post requires three Rawl type bolt fixings. Collapsible posts require a padlock, supplied separately.

AT7 PVC Electrical Insulation Tape

Features:
Flame retardant and self extinguishing - safe to use on electrical cables.
Wide range of colours - suitable for colour coding.
UV resistant.
Manufactured to BS EN60454 which is the European standard for PVC and other electrical insulating tapes.

Applications:
Colour coding and insulation of electrical cabling.
Masking off during chemical and electro-plating.
Degaussing and coil wrapping.
Colour coding components, intermediate stock and finished goods during manufacture.
Masking and protection of aircraft portholes during manufacture.
Masking off aircraft landing gear when cadmium plating.
Cable harnessing, insulation, abrasion protection for OEM companies in household appliances market.
Temporary strapping of socks and protective pads for sports people.

Specifications:
Thickness: 0.13mm.
Breaking load: 26 N/cm.
Elongation: 180%.
Adhesion to steel: 2.4 N/cm.
Adhesion to self: 2.1 N/cm.
Service temp: -5C to 70C.
Roll length: 33 Metres.

AT7 PVC Electrical Insulation Tape

Features:
Flame retardant and self extinguishing - safe to use on electrical cables.
Wide range of colours - suitable for colour coding.
UV resistant.
Manufactured to BS EN60454 which is the European standard for PVC and other electrical insulating tapes.

Applications:
Colour coding and insulation of electrical cabling.
Masking off during chemical and electro-plating.
Degaussing and coil wrapping.
Colour coding components, intermediate stock and finished goods during manufacture.
Masking and protection of aircraft portholes during manufacture.
Masking off aircraft landing gear when cadmium plating.
Cable harnessing, insulation, abrasion protection for OEM companies in household appliances market.
Temporary strapping of socks and protective pads for sports people.

Specifications:
Thickness: 0.13mm.
Breaking load: 26 N/cm.
Elongation: 180%.
Adhesion to steel: 2.4 N/cm.
Adhesion to self: 2.1 N/cm.
Service temp: -5C to 70C.
Roll length: 33 Metres.

AT7 PVC Electrical Insulation Tape

Features:
Flame retardant and self extinguishing - safe to use on electrical cables.
Wide range of colours - suitable for colour coding.
UV resistant.
Manufactured to BS EN60454 which is the European standard for PVC and other electrical insulating tapes.

Applications:
Colour coding and insulation of electrical cabling.
Masking off during chemical and electro-plating.
Degaussing and coil wrapping.
Colour coding components, intermediate stock and finished goods during manufacture.
Masking and protection of aircraft portholes during manufacture.
Masking off aircraft landing gear when cadmium plating.
Cable harnessing, insulation, abrasion protection for OEM companies in household appliances market.
Temporary strapping of socks and protective pads for sports people.

Specifications:
Thickness: 0.13mm.
Breaking load: 26 N/cm.
Elongation: 180%.
Adhesion to steel: 2.4 N/cm.
Adhesion to self: 2.1 N/cm.
Service temp: -5C to 70C.
Roll length: 33 Metres.

AT7 PVC Electrical Insulation Tape

Features:
Flame retardant and self extinguishing - safe to use on electrical cables.
Wide range of colours - suitable for colour coding.
UV resistant.
Manufactured to BS EN60454 which is the European standard for PVC and other electrical insulating tapes.

Applications:
Colour coding and insulation of electrical cabling.
Masking off during chemical and electro-plating.
Degaussing and coil wrapping.
Colour coding components, intermediate stock and finished goods during manufacture.
Masking and protection of aircraft portholes during manufacture.
Masking off aircraft landing gear when cadmium plating.
Cable harnessing, insulation, abrasion protection for OEM companies in household appliances market.
Temporary strapping of socks and protective pads for sports people.

Specifications:
Thickness: 0.13mm.
Breaking load: 26 N/cm.
Elongation: 180%.
Adhesion to steel: 2.4 N/cm.
Adhesion to self: 2.1 N/cm.
Service temp: -5C to 70C.
Roll length: 33 Metres.

PVC Insulation Tape

Flame retardant and self extinguishing - safe to use on electrical cables, UV resistant. Manufactured to
BS EN 60454. Roll length: 33m.

AT7 PVC Electrical Insulation Tape

Features:
Flame retardant and self extinguishing - safe to use on electrical cables.
Wide range of colours - suitable for colour coding.
UV resistant.
Manufactured to BS EN60454 which is the European standard for PVC and other electrical insulating tapes.

Applications:
Colour coding and insulation of electrical cabling.
Masking off during chemical and electro-plating.
Degaussing and coil wrapping.
Colour coding components, intermediate stock and finished goods during manufacture.
Masking and protection of aircraft portholes during manufacture.
Masking off aircraft landing gear when cadmium plating.
Cable harnessing, insulation, abrasion protection for OEM companies in household appliances market.
Temporary strapping of socks and protective pads for sports people.

Specifications:
Thickness: 0.13mm.
Breaking load: 26 N/cm.
Elongation: 180%.
Adhesion to steel: 2.4 N/cm.
Adhesion to self: 2.1 N/cm.
Service temp: -5C to 70C.
Roll length: 33 Metres.