Shrinking Hammers

Highly polished striking heads and cheeks. One flat round face and one milled, serrated square face. Hickory shaft. Manufactured to BS 4114. Specially designed for panel beating on slightly stretched areas of metal. The cross milled face forces small amounts of metal into the spaces created.

Sledge Hammers

Double faced sledge hammers are fully forged and heat-treated. Ideal for use on spikes, stakes, cold chisels and hardened nails. They are available with a hickory or fibreglass shaft.

Fibreglass Shaft BS 876

Dampens the impact transmitted to the user's hand and wrist. The high strength of the shaft and head bond make the hammer virtually unbreakable. Tested to the requirements of BS 876: 1981 (head stamped BS 876).

Kennedy Ball Pein Hammers

Ball Pein hammers are manufactured from high-grade drop forged steel fully heat-treated. Ideal for use with cold chisels, punches, rivets and for the shaping of metal.

Hickory Shaft

With fine grain, forged steel head, hardened and tempered with polished faces.

Sheet Metal Working Tools

Specially designed for use on sheet lead, copper, zinc, aluminium, etc. All items are made from polished high density hardwood.

Bossing Mallets

Delivers the necessary blow to shape sheet metal and are still made to the exacting standards that coachbuilders, fabricators and vehicle restorers have demanded over many years. Available in 4 sizes measured across the widest part of the egg shaped head.

Kennedy Ball Pein Hammers

Ball Pein hammers are manufactured from high-grade drop forged steel fully heat-treated. Ideal for use with cold chisels, punches, rivets and for the shaping of metal.

Hardwood Shaft

With fine grain, forged steel head, hardened and tempered with polished faces.

Welders Chipping Hammers

Scaling and chipping hammers. For boiler scaling, weld dressing etc

Welder's Chipping hammer

Hardened and tempered steel head chisel edge and point striking faces with epoxy coating. Spring steel impact absorbing handle for user comfort.

Kennedy Club Hammers

Kennedy Club or lump hammers have fully forged and heat-treated hammer heads with flat striking faces and chamfered edges.

They are suitable for use with cold chisels, brick bolsters, star drills and masonry nails in confined work areas with little room for a full arc swing, the wide face makes it ideal for striking chisels and punches.

Available in a range of weights with hickory or fibreglass shafts.

Hickory Shaft

With fine grain, forged steel head, hardened and tempered with polished faces.

Finishing Picks

Highly polished striking heads and cheeks. With crowned faces. Will remove low spots when metal finishing. Hardwood shaft and finishing beater. Manufactured to BS 4114.

Round Pick and Finishing Panel Beater

Medium weight with crowned face designed to remove high spots.

Kennedy Club Hammers

Kennedy Club or lump hammers have fully forged and heat-treated hammer heads with flat striking faces and chamfered edges.

They are suitable for use with cold chisels, brick bolsters, star drills and masonry nails in confined work areas with little room for a full arc swing, the wide face makes it ideal for striking chisels and punches.

Available in a range of weights with hickory or fibreglass shafts.

Hickory Shaft BS 876

Tested to the requirements of BS 876: 1981 (head stamped BS 876).

Kennedy Club Hammers

Kennedy Club or lump hammers have fully forged and heat-treated hammer heads with flat striking faces and chamfered edges.

They are suitable for use with cold chisels, brick bolsters, star drills and masonry nails in confined work areas with little room for a full arc swing, the wide face makes it ideal for striking chisels and punches.

Available in a range of weights with hickory or fibreglass shafts.

Club Hammer with Fibreglass Shaft

Kennedy Club hammers with a fibre glass shaft have a textured slip resistant rubber grip. The shaft & grip combine to dampen the impact transmitted through to the user"s hand and wrist.