Comfortable, Lightweight Protection Against Biohazards and Chemicals offer Type 3-B, 4, 5 and 6 barrier protection against a wide range of inorganic chemical and biological hazards, yet are lightweight and comfortable too. Their ergonomic fit, help wearers to handle even difficult tasks more easily and comfortably. Resists liquid splashes up to 2 bar. Has a chemical permeation barrier to a broad range of concentrated inorganic chemicals 100% particle-tight fabric, protection includes fibres and particulate radioactive contamination. Straightforward disposal: can be disposed of via standard means according to legislation and regulations as Tychem® does not contain halogens. Stitched, over-taped seams offer the same permeation barrier as the fabric

Chemical protective clothing – category III, type 3-B, 4, 5 and 6

colour: yellow

Type C

Pocket Tabbards

General purpose tabbard for use in kitchens, serveries etc.
195gsm 65% Polyester / 35% Cotton
Large patch pocket
Adjustable stud side tubs
Self fabric bound trim
Teflon coated
Available in a full range of sizes from Small to XX-Large.

Colours available:
Black Navy Red Royal Kelly* Yellow* White Bottle
*These colours are available up to size XL only.

Body Protectors - Proshield 10

Garment description and features: Nylon zipper front with zipper flap, attached hood, elastic at hood, wrists, back waist and ankles. Exceeds minimum size requirements for North America and Europe; Set sleeve design with underarm gussets (extra fabric) allows greater arm movement. Unique design zips over neck to above the chin, eliminating exposed neck areas. Serged seams.
CE Type 5 & 6 for noxious dust and splash. Fabric description: SMMS material. Ideal for dry particulate barrier and repellency. Lightweight, and breathable. Improved strength, splash and particulate resistance in comparison to many traditional SMS products. Anti-static treated.

"Guard Master" Disposable Hooded Coveralls

Type 5/6 coveralls. Disposable coveralls with hood, elastic cuffs, back and ankles. 1-way zip at front with 1-ply stormflap. Made from 55gsm SMS (spunbond, microporous, spunbond) material with inside stitching. For noxious dust and splash. Ideal for dry particulate barrier and repellency. Lightweight and breathable. Liquid repellent. Designed to zip over neck to above the chin to protect exposed neck areas.
EN13034 for limited protection against liquid particles (type 6).
EN13982-1 (type 5) for protection against solid particles.
Comes in blue or white.
Available in five sizes from small to XXL.

Tyvek® Labo Hooded Coverall

DuPont™ Tyvek® Labo is a coverall especially designed for use in laboratories and in the pharmaceutical industry. Tyvek® Labo acts as a barrier that protects both the wearer from chemical threats and the process from contamination by the wearer.

Tyvek® Labo

Pocket Tabbards

General purpose tabbard for use in kitchens, serveries etc.
195gsm 65% Polyester / 35% Cotton
Large patch pocket
Adjustable stud side tubs
Self fabric bound trim
Teflon coated
Available in a full range of sizes from Small to XX-Large.

Colours available:
Black Navy Red Royal Kelly* Yellow* White Bottle
*These colours are available up to size XL only.

Pocket Tabbards

General purpose tabbard for use in kitchens, serveries etc.
195gsm 65% Polyester / 35% Cotton
Large patch pocket
Adjustable stud side tubs
Self fabric bound trim
Teflon coated
Available in a full range of sizes from Small to XX-Large.

Colours available:
Black Navy Red Royal Kelly* Yellow* White Bottle
*These colours are available up to size XL only.

Chemical Resistant Special Hazard Clothing

CPBH-R is a Chemsol Plus Boilersuit with (Elasticated) Drawcord Hood, Zip Front, Double Storm Facing (Velcro Closure) and 1 x Reflective Strip around the Chest. It’s manufactured from Elastomised PVC fabric, having Flame retardant properties to EN533 Index 1 and Anti-Static properties to EN 1149-1. The suit conforms to EN 465 Type 4 and EN 466 Type 3.

CPBH-R Plus Boiler Suit

Colour: Green

For the full range of workwear please refer to our catalogue.

Chrome Leather Welder's Clothing

A range of economically priced, rugged workwear manufactured from high quality selected chrome leather. Spatter resistant and tear resistant. The full range offers head to toe protection against weld spatter and grinding sparks. Suitable for use in workshops, foundries and on-site.

Jackets

Stud fastening jacket for full neck to waist protection against weld spatter and grinding sparks. With external side pocket, neck is lined with soft split leather for extra comfort. All seams have heavy duty stitching for durability and extended wear. Meets all the requirements of BS EN ISO 11611:2007.

Flame Retardant Boiler Suit

These Portwest coveralls are manufactured from Bizweld which is a heavyweight 100% cotton fabric that has been specially treated with a flame retardant finish. Typical uses: welding, cutting, grinding, electrical on-shore and off-shore oil and gas industries, automotive, public utilities etc.

Side pockets with access.
Stud front.
Rule pocket.
Resilient for over 50 washes
Certified En470-1, EN531: A1, B1, C1 and EN533.

BIZ1