16mm Spigot End Fittings

Metric

Open End

1/4", 3/8" Square Drive Adjustable Ratchet Fixed Head (Push Through)

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



72 tooth fine ratchet mechanism which allows use in confined areas. Incorporating "click" sound and "snap" feel to indicate when torque setting has been reached. Knurled disc on the ratchet head to reverse ratchet direction. Clear plastic handle protects the scale from accidental damage. Torque setting can be altered by rotating the adjustment lever at the base of the wrench. Pre-set "P" type versions available to eliminate the torque setting being altered on the production line. Fixed head version has push square drive for instant direction reversal. All with ratchet except 11125 which is non-ratchet.

Torque Range: 4-20Nm 40-180ibf.in

For further specification on this product please see the attached PDF under the additional information tab.

Standard Series Torque Multiplier

The 'Standard series' torque multiplier has been designed for the specialist user where it is necessary to provide higher torque than would otherwise be possible due to limitations on space or operator strength. This series employs multiple stage epicyclic gearing to give a wide range of torque outputs and ratios to suit most applications. The torque multiplication is accurate to more than plus/minus 4% with a maximum output of 47,500Nm. *Models contain the AWUR 'anti wind up ratchet' mechanism. As with any high ratio gearbox (25:1 or more) a certain amount of wind-up (spring) has to be taken up before any useful tightening work can be applied to the nut. Each time the input device is released, the wind-up will rotate back against the direction of operation.The AWUR mechanism retains all of the wind up forces as they are created locking the multiplier onto the nut being tightened. This means that even when used upside down the multiplier will support it's own weight.



Torque Range: 3400Nm 2500 Ibf.ft
Square Drive: 3/4 '' Input 1'' Output

For further specification on this product please see the attached PDF under the catalogue PDF links tab.

1" Square Drive Industrial Adjustable Ratchet

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Robust construction gives accurate results to +/-4%. Back break action indicates when specified torque has been achieved and improves accuracy by reducing the possibility of over tightening. With calibration certificate fully traceable and suitable for ISO 9000 assessment purposes. With ratchet.

Torque Range: 700-1000Nm 500-1000ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

16mm Spigot End Fittings

Inch

Open End

16mm Spigot End Fittings

Metric

Open End

1/4", 3/8" Square Drive "P" Type, Ratchet Head (Pre-set)

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Accuracy exceeds all international standards. Traceable calibration certificate supplied to satisfy ISO 9000 quality systems. High quality 72 tooth ratchet allows use in confined spaces. Torque Handle versions, both 16mm spigot and 9 x 12mm female. Unmistakable signal when set torque is reached. With reversible ratchets. ?P? Type versions designed to discourage unauthorised alteration.

Torque Range: 4-20Nm 40-180ibf.in

For further specification on this product please see the attached PDF under the additional information tab.

Norbar Torque Wrenches

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS).

3/4" Square Drive 'P' Type Ratchet (Pre-set)

Designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a Torque Wrench Analyser or similar instrument. Setting system is designed to discourage unauthorised alteration. Coloured end seals are provided to identify the wrench to a particular operator, torque setting or calibration period. With reversible ratchets.

Torque Range: 40-400Nm 30-300ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.

1/4", 3/8" Square Drive Adjustable Ratchet Fixed Head (Push Through)

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



72 tooth fine ratchet mechanism which allows use in confined areas. Incorporating "click" sound and "snap" feel to indicate when torque setting has been reached. Knurled disc on the ratchet head to reverse ratchet direction. Clear plastic handle protects the scale from accidental damage. Torque setting can be altered by rotating the adjustment lever at the base of the wrench. Pre-set "P" type versions available to eliminate the torque setting being altered on the production line. Fixed head version has push square drive for instant direction reversal. All with ratchet except 11125 which is non-ratchet.

Torque Range: 4-20Nm 40-180ibf.in

For further specification on this product please see the attached PDF under the additional information tab.

1" Square Drive Professional Adjustable Ratchet

All Norbar torque wrenches are designed and manufactured to exceed the following national and international standards: BS6703: 1988, ISO 6789: 1992 & U.S.A.GGG-W-00686-C (GSA-FSS)



Incorporates "click" sound and "snap" feel to indicate when torque setting has been reached. Non length dependant. Extension handle can be used to reduce operator effort (extension handle supplied as standard with models 800, 1000 and 1500). Fine 60 tooth ratchet allows the wrench to be used in confined areas. Accuracy of +/-3%. *Weight does not include extension handle. Extension handle specification, Length: 700mm, Weight: 1.6kg.

Torque Range: 500-1500Nm 370-1100ibf.ft

For further specification on this product please see the attached PDF under the additional information tab.