IdentiPlate™

The exclusive range of Identi products have been designed for warehouse and factory applications to maximise the visual impact of extinguisher positions and to make it obvious when equipment has been removed. All versions are based on a standard design for consistency whether extinguishers are wall mounted, mounted on stanchions/mezzanine barriers or on free standing versions. The statutory European fire extinguisher symbol is incorporated with a separate blank section for the Identi extinguishant identification label.

The IdentiPlate is constructed from high visibility red 'foamex' rigid plastic and is pre-drilled at the corners for fixing.

IdentiPlate X/SBP

Identi single fire extinguisher back plate.
Size (H x W): 900 x 300mm.

Extinguisher(s) supplied separately.
Remember to order labels and brackets separately.

Kidde Multi-Purpose Fire Extinguisher

For use on any type of fire where safe to do so. Pressure gauge reassures you that the extinguisher is fully charged.
Service and maintenance free - simply use and replace.
Bracket included for simple installation.
BS EN3 Fire Rating: 13A 89BC.
A = wood, paper.
B = flammable liquids, petrol.
C = gaseous fires.
Six year manufacturer’s warranty.

Domestic

IdentiStand™

The exclusive range of Identi products have been designed for warehouse and factory applications to maximise the visual impact of extinguisher positions and to make it obvious when equipment has been removed. All versions are based on a standard design for consistency whether extinguishers are wall mounted, mounted on stanchions/mezzanine barriers or on free standing versions. The statutory European fire extinguisher symbol is incorporated with a separate blank section for the Identi extinguishant identification label.

The IdentiStand is of a very rugged design and is ideal for any situation within factory/ warehouse environments where extinguishers are required but there is no available wall space to mount them to. The stand is constructed from steel and is finished with a high visibility red polyester coating. The feet have pre-drilled holes to enable floor fixing if required. The back plate features a unique bracket mounting slot to facilitate quick and simple bracket installation.
Extinguisher(s) supplied separately.
Remember to order labels and brackets separately.

Single IdentiStand

X/IS1
Size (H x W): 1010 x 300mm.

Ultimex Fire Extinguishers

The Ultimex range of fire extinguishers from Fixfire is BAFE Approved, certified to BSEN3 and CE marked in accordance with the new PED regulations. All refillable, supplied pre-charged and individually inspected with service labels endorsed prior to despatch. Kitemark approved with five year guarantee and colour coded labels to help identification of correct extinguisher.

Foam

The Supafoam from Fixfire is a lightweight alternative to the traditional nine litre water extinguisher. The Supafoam is safe for accidental use on fires involving electrical equipment
and is ideal for offices and any environment where weight is a concern.

Combination Smoke & Carbon Monoxide Alarm

900-0122UK
Unique voice alarm tells you which danger has been detected. Kidde Proprietary Electrochemical sensor technology with a peak level memory to alert you if dangerous CO levels where detected during your absence. Battery operated - works even during a power-cut, 3x AA batteries supplied as standard, Loud 85db alarm - to wake you as you are sleeping. Low battery warning chirp notifies you when the battery needs to be replaced. Test/reset button and bracket included for simple installation. End of life warning signal alerts you when alarm needs replacing after seven years. Five year manufacturers warranty.

Extinguisher Brackets

The J Bracket is compatible with most standard water, foam and powder extinguishers above three litre or 3kg size. There are two CO2 brackets to suit the 2kg and 5kg versions. For use with IdentiStand and IdentiPlate or where extinguishers are wall mounted.

X/LB2 2kg CO2 Lug Bracket

Fixfire Battery-Powered Fire Alarm

A simple, low cost fire alarm solution for small buildings or areas where a full BS5839 alarm system is not required. Battery operated, no mains required. Combined call point and sounder, can be used individually or with up to 12 units linked to form a complete fire alarm solution. Ideal for use in small retail, warehouses, village halls, temporary buildings, construction sites, portacabins, industrial units, camp sites and marquees. Designed for ease of installation. Resets with a simple key. No glass to replace or spares required. Drop down flag, illuminated LED and 85dB sounder light, compact, industry standard format.

IDENTiLabel™

The exclusive range of Identi products have been designed for warehouse and factory applications to maximise the visual impact of extinguisher positions and to make it obvious when equipment has been removed. All versions are based on a standard design for consistency whether extinguishers are wall mounted, mounted on stanchions/mezzanine barriers or on free standing versions. The statutory European fire extinguisher symbol is incorporated with a separate blank section for the Identi extinguishant identification label.

For use with IdentiStand and IdentiPlate. The Identi extinguishant labels are all sized at 140 x 140mm and fit in a dedicated blank section. The labels should be ordered separately to the relevant Identi product.

Extinguishant Labels

S/4320
AFFF Foam Extinguishant Label

Ultimex Fire Extinguishers

The Ultimex range of fire extinguishers from Fixfire is BAFE Approved, certified to BSEN3 and CE marked in accordance with the new PED regulations. All refillable, supplied pre-charged and individually inspected with service labels endorsed prior to despatch. Kitemark approved with five year guarantee and colour coded labels to help identification of correct extinguisher.

Water

Water extinguishers are suitable for Class A fires. Water is a fast and efficient extinguishant and works by having a rapid cooling effect so that insufficient heat remains to sustain burning and continuous ignition ceases. Not safe for use on electrical fires.

IDENTiLabel™

The exclusive range of Identi products have been designed for warehouse and factory applications to maximise the visual impact of extinguisher positions and to make it obvious when equipment has been removed. All versions are based on a standard design for consistency whether extinguishers are wall mounted, mounted on stanchions/mezzanine barriers or on free standing versions. The statutory European fire extinguisher symbol is incorporated with a separate blank section for the Identi extinguishant identification label.

For use with IdentiStand and IdentiPlate. The Identi extinguishant labels are all sized at 140 x 140mm and fit in a dedicated blank section. The labels should be ordered separately to the relevant Identi product.

Extinguishant Labels

S/4326
Water Extinguishant Label