Combination Smoke & Carbon Monoxide Alarm

900-0122UK
Unique voice alarm tells you which danger has been detected. Kidde Proprietary Electrochemical sensor technology with a peak level memory to alert you if dangerous CO levels where detected during your absence. Battery operated - works even during a power-cut, 3x AA batteries supplied as standard, Loud 85db alarm - to wake you as you are sleeping. Low battery warning chirp notifies you when the battery needs to be replaced. Test/reset button and bracket included for simple installation. End of life warning signal alerts you when alarm needs replacing after seven years. Five year manufacturers warranty.

Kidde Multi-Purpose Fire Extinguisher

For use on any type of fire where safe to do so. Pressure gauge reassures you that the extinguisher is fully charged.
Service and maintenance free - simply use and replace.
Bracket included for simple installation.
BS EN3 Fire Rating: 13A 89BC.
A = wood, paper.
B = flammable liquids, petrol.
C = gaseous fires.
Six year manufacturer’s warranty.

Domestic

Extinguisher Brackets

The J Bracket is compatible with most standard water, foam and powder extinguishers above three litre or 3kg size. There are two CO2 brackets to suit the 2kg and 5kg versions. For use with IdentiStand and IdentiPlate or where extinguishers are wall mounted.

X/JB J Bracket

IdentiPlate™

The exclusive range of Identi products have been designed for warehouse and factory applications to maximise the visual impact of extinguisher positions and to make it obvious when equipment has been removed. All versions are based on a standard design for consistency whether extinguishers are wall mounted, mounted on stanchions/mezzanine barriers or on free standing versions. The statutory European fire extinguisher symbol is incorporated with a separate blank section for the Identi extinguishant identification label.

The IdentiPlate is constructed from high visibility red 'foamex' rigid plastic and is pre-drilled at the corners for fixing.

IdentiPlate X/DBP

Identi double fire extinguisher back plate.
Size (H x W): 900 x 600mm.

Extinguisher(s) supplied separately.
Remember to order labels and brackets separately.

IDENTiLabel™

The exclusive range of Identi products have been designed for warehouse and factory applications to maximise the visual impact of extinguisher positions and to make it obvious when equipment has been removed. All versions are based on a standard design for consistency whether extinguishers are wall mounted, mounted on stanchions/mezzanine barriers or on free standing versions. The statutory European fire extinguisher symbol is incorporated with a separate blank section for the Identi extinguishant identification label.

For use with IdentiStand and IdentiPlate. The Identi extinguishant labels are all sized at 140 x 140mm and fit in a dedicated blank section. The labels should be ordered separately to the relevant Identi product.

Extinguishant Labels

S/4328
Powder Extinguishant Label