Kennedy Precision Hand Files Industrial Quality

Engineers? Hand files have parallel edges, one edge uncut. For flat filing, corner filing and deburring. Multi-purpose and for other work where a ?safe? or uncut edge is needed. Double cut. Available in tanged pattern 100mm (4") and 150mm (6") lengths. Manufactured to BS 498: 1990.

Hand

Available in Cut 0, 2 and 4.

Kennedy Precision Hand Files Needle Pattern (Round Handle)

Available in 14cm and 16cm lengths and a complete range of shapes. Manufactured to BS 498:1990.

Crossing

Available in Cut 2 or 4.

Kennedy Engineers' Hand Files Industrial Quality

Edges taper towards point. For filing and sharpening hand saws. Points are left uncut. Taper Saw Files are used for filing every type of handsaw which have 60 angle teeth. These files are single cut with edges that are set and cut for filing the gullet between the saw teeth.

Taper Saw

Second Cut

Kennedy Precision Hand Files Industrial Quality

Engineers' Half Round files have edges and surfaces that taper towards the point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Available in tanged pattern 100mm (4") and 150mm (6") lengths. Manufactured to BS 498: 1990.

Half-Round

Available in Cut 0, 2 and 4.

Diemakers Riffler File Sets

Swiss Pattern. 12 Piece 15cm - cut 2 riffler files are used by diemakers, jewellers, silversmiths, engravers etc. All are double ended with the same cut both ends.

12 Piece Diemakers Riffler File Set A - 15cm Cut 2

Swiss pattern. Set A 15cm - Cut 2.
Contents (1 of each): 900, 911, 914, 916, 918, 940, 952, 957, 981, 983, 985 and 987

Kennedy Engineers' Hand Files Industrial Quality

Parallel edges, surfaces tapered towards end. Narrow version of hand file. For use where access is restricted. These files are designed for millwrights and mechanics for use in enlarging key-ways, slots, etc., close to the shoulder. Available as Smooth Cut, Second Cut and Bastard Cut.

Pillar

Second Cut

Kennedy Engineers' Hand Files Industrial Quality

Engineers' Half Round Files have edges and surfaces that taper towards the point. Dual application; suitable for concave surfaces and flat filing. For rapid removal of metal. Available as Smooth Cut, Second Cut and Bastard Cut.

Half Round

Second Cut

Kennedy Engineers' Hand Files Industrial Quality

Parallel surfaces, edges tapered to a point. For narrow grooves, keyways, slots etc. Warding Files are used by locksmiths in repairing or filing ward notches in keys. Also suited for use in narrow spaces. All sides double cut. Available as Smooth Cut, Second Cut and Bastard Cut.

Warding

Smooth Cut

Diemakers Riffler Files

Swiss Pattern. Available in a complete range of shapes the 15cm are used by diemakers, jewellers, silversmiths, engravers etc. All are double ended with the same cut both ends.

Kennedy Engineers' Hand Files Industrial Quality

Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Available as Smooth Cut, Second Cut and Bastard Cut.

Square

Second Cut