Kennedy Precision Hand Files Needle Pattern (Round Handle)

Available in 14cm and 16cm lengths and a complete range of shapes. Manufactured to BS 498:1990.

Warding

Available in Cut 0, 2 or 4.

Kennedy Tooth File Milled Curved Set

Manufactured from alloy steel and feature undercut teeth that produce a more aggressive cut than conventional files and requires less operator effort. Suitable for use on a wide variety of materials including aluminium, steels, alloys, brass, copper, wood, plastics etc. Please note: Handles are not supplied as standard and should be ordered separately as required.

Curved Tooth 3 Piece File Set

Contents:
1x Flat 200mm (8"), 255mm (10") and 305mm (12") standard cut.

Kennedy Engineers' Hand Files Industrial Quality

Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Available as Smooth Cut, Second Cut and Bastard Cut.

Square

Bastard Cut

Kennedy Needle Files Industrial Diamond-Coated 16cm

Available in seven shapes, Hand, Half Round, Three Square, Round, Square, Knife and Flat and two grain sizes, 120/140 and 325/400 offering the solution to finishing problems where material hardness makes conventional files ineffective. Plated with finely selected diamond powder, 120 - 150 mesh. Can be used on tungsten carbide, ceramics, carbon, glass, fibreglass and hardened steels such as stainless steel, nimonics, titanium etc.

Square

Kennedy Precision Hand Files Industrial Quality

Parallel edges, surfaces tapered towards end. Narrow version of hand file. For use where access is restricted. Available in tanged pattern 100mm (4") and 150mm (6") lengths. Manufactured to BS 498: 1990.

Pillar

Available in Cut 0, 2 and 4.

Diemakers Riffler Files

Swiss Pattern. Available in a complete range of shapes the 15cm are used by diemakers, jewellers, silversmiths, engravers etc. All are double ended with the same cut both ends.

Kennedy Precision Hand Files Industrial Quality

Parallel edges, surfaces taper towards point. For groove, rectangular hole and internal corner filing. Preferable to a Flat File because of its heavier section. Available in tanged pattern 100mm (4") and 150mm (6") lengths. Manufactured to BS 498: 1990.

Square

Available in Cut 0, 2 and 4.

Kennedy Rasps

Designed for general use and best suited to softer materials such as wood, plastics, fillers, leather and lead.

Half Round

Smooth Rasp Cut

Kennedy Engineers' Hand Files Industrial Quality

Engineers' Hand files have parallel edges, one edge uncut. For flat filing, corner filing and deburring. Multi-purpose and for other work where a 'safe' or uncut edge is needed. Double cut. Available as Smooth Cut, Second Cut and Bastard Cut.

Hand

Bastard Cut

Kennedy Precision Hand Files Industrial Quality

Parallel surfaces, edges tapered to a point. For narrow grooves, keyways, slots etc. Warding Files are used by locksmiths in repairing or filing ward notches in keys. Also suited for use in narrow spaces. Available in tanged pattern 100mm (4") and 150mm (6") lengths. Manufactured to BS 498: 1990.

Warding

Available in Cut 0, 2 and 4.