Binzel Mig Torch Accessories

Also compatible with Parweld torches.

Contact Tips

Process & Heating Nozzles

200mm neck for acetylene nozzles.

Neck

Process & Heating Nozzles

Fully compatible with most heavy duty welding shanks and blowpipes. Including 1144, 1143, 2010, Saffire 5, 4, 3, NM250, NM400, Citogas HDT200, NMC200. Size 13 suitable for Saffire 4 and 3 only.

Acetylene Gouging Nozzles - A-GNM

Oxygen/Propane Cutting Kit

An oxygen & propane cutting kit capable of cutting up to 300mm (12”).

Contents:
18” - 90º nozzle mix cutting blowpipe.
Single stage 10bar/150psi oxygen plugged regulator.
Single stage 4bar/58psi propane plugged regulator.
Oxygen thermal in-line flashback arrestor.
Fuel gas thermal in-line flashback arrestor.
Pnm short nozzles.
Nozzle cleaners.
Cup type spark lighter.
Drop forged combination spanner.
Cup goggle 2" round shade 5 - EN166 & EN175.
Red plastic carry case.
*Requires separate hose set.

040951

Solent Flaw Detector Inspection System

Fast reliable method for visually inspecting and spot-checking surfaces of welds, exotic alloys or standard metals, highly stressed structural members, critical castings, shafts, gears, spindles, and any other hard part where identification of surface flaws is essential. Detects flaws such as cracks, pin holes, welding laps and porousness either during manufacture or on site. A three part system. SFD-501C is a cleaner. SFD-502C is a dye penetrant. SFD-503C is a developing fluid that reacts with the dye in SFD-502C to show small cracks in the weld. Each part supplied in an ozone friendly 500ml aerosol.

Flaw Detector Developer

White film to highlight any faults which have been detected when using Flaw Detector Penetrant. The product should be removed using Flaw Detector Cleaner Spray once cracks have been found and marked.

Parweld Mig Torch Accessories

Also compatible with Binzel Torches.

Heavy Duty Swaged Welding Nozzles

For use with heavy duty shank.

Murex Process/Heating Nozzles and Adaptors

Fully compatible with most heavy duty welding shanks and blowpipes. For use with blowpipes* 1143, 1144; Saffire NM250; Citogas NMC200. Up to 766,000 Btu/h can be achieved from 5H when used on blowpipe with adaptor. *Use adaptor 120458.

Available in a choice of:
1H (72-163Btu/h [1000s])
2H (102-188Btu/h [1000s])
3H (183-361Btu/h [1000s])
4H (236-401Btu/h [1000s])
5H (281-618Btu/h [1000s])

Propane Heating Nozzles - P-H

Murex Mig Accessories

Long, Tapered and Parallel nozzles available.

Nozzles

SWP Welding and Cutting Kits

This 23 piece Type 5 SWP welding, cutting and heating set is supplied complete with all torch end parts and consists of a Type 5 shank, Type 5 cutting attachment, a acetylene mixer, and a selection of ANM and swaged nozzles the kit is also supplied with a pistol type spark lighter and a nozzle cleaning set.

The swaged welding nozzles supplied in the kit are manufactured from high grade swaged tellurium copper. The unique mandrel swaging provides smooth accurate gas passages that produces a precisely controlled flame shape.

The ANM Series cutting nozzles supplied in the kit are manufactured from tellurium copper and are of solid, one piece drawn construction. This technology provides the best conditions for a high velocity gas such as acetylene and enhances stability and cutting efficiency.

This kit does not include regulators or flash back arrestors.

5 Welding, Cutting and Heating Set

SWP Type 5 Welding, Cutting and Heating Set specification and contents:
Welding capacity up to 8mm.
Cutting capacity up to 75mm.

Set contents:
Style 5 shank.
Style 5 cutting attachment.
Style 5 acetylene welding mixer.

6 Swaged nozzles (sizes 2, 5, 7, 10, 13 and 25).
Two ANM oxy acetylene gas cutting nozzles, sizes:
ANM 3/64'' is ideally used for cutting plate thickness between 6-20mm. ( 1/4 ''-3/4'').
ANM 1/16'' is ideally used for cutting plate thickness between 20-75mm. (3/4''-3'')

Pistol spark lighter (x10 flints) suitable for igniting oxy acetylene.