Oxygen/Acetylene Welding Hose Sets

Oxy Acetylene Oxygen (blue) and acetylene (red). Kink/ crush resistant. 6 and 8mm (general use). 10mm (heavy duty/flame cutting). Supplied fully fitted complete with hose check
valves.

RED insulated liner FOR WIRES
with retainer 1.0/1.2mm

TO SUIT: MB15 MB25 MB36

Oxygen/Propane Welding Hose Sets

Matched pairs of hose - one each for oxygen (blue) and propane (orange). Kink and crush resistant. 8mm for general use. Supplied fully fitted complete with hose check valves.

Kennedy MIG Welding Torches

Kennedy Mig/Mag air cooled welding torches are fitted with EURO connectors, have insulated gas nozzles for use with mixed gases and are supplied with a supple four metre cable with a sprung guide into the handle to ensure smooth wire feed without snagging. These tried and trusted quality torches have been used throughout industries such as automotive construction/repair, machine and steel constructions etc.

Features of Kennedy Mig/Mag air cooled welding torches:
Optimum air cooling torch cooling for high endurance.
Ergonomically designed handle style for improved comfort in every position and over extended periods of use.
Light and highly flexible cable assembly, reduces user fatigue during the weld cycle.
Robust construction for durability and extended torch life.

MTE154 Mig/Mag Welding Torch Air Cooled

Fitted with EURO connectors, with insulated gas nozzles for use with mixed gases and a 4m supple, lightweight cable to improve productivity.
MTE-154 suits Kennedy Panther and Leopard.

Kennedy Mig Torch Accessories

Compatible with Parweld and Binzel Torches.

Contact Tips & Tip Adaptors

Kennedy Mig Torch Accessories

Conical and Tapered

Gas Nozzles

Kennedy Welding Accessories

Kennedy PVC welding curtains comply with EN1598 to block out welding light. The curtains have snap-fasteners on both sides to allow several to be joined together to create the desired width.

Supplied with reinforced holes on the upper edge and steel suspension rings.

PVC Welding Curtains

All Kennedy PVC welding curtains are made of a pliable, self-extinguishing PVC material with a flash point of 320-390C.

Conform to: EN1598 for welding (fulfilling requirements on transmittance, reflectance, UV-stability and resistance to ignition).

Supplied with steel curtain rings.

Available in a range of sizes and colours.

Argon & Acetylene Regulators
.

Designed with 2 gauges to indicate cylinder contents and outlet pressure.
Argon regulator outlet gauge is calibrated for
flow 0 - 35lpm. Acetylene regulator has a
calibrated flow rate
of 0 - 1.5 bar
with a full
250 bar
capacity.

Features:
Flow rates up to
80m3/h
(2824 ft3/h)
300 bar
capability.
Features
2 gauges
displaying
cylinder contents
and pressure.

Bottom entry design suited
for top outlet cylinder valves.
Fitted with 1/4? parallel threaded gauges.
Fitted with standard 3/8? BSP outlet.
Fitted with 5/8? BSP inlet connections.

Kennedy Mig Torch Accessories

Compatible with Parweld and Binzel Torches.

Contact Tips & Tip Adaptors

Kennedy Welding Accessories

Kennedy PVC welding curtains comply with EN1598 to block out welding light. The curtains have snap-fasteners on both sides to allow several to be joined together to create the desired width.

Supplied with reinforced holes on the upper edge and steel suspension rings.

PVC Welding Curtains

All Kennedy PVC welding curtains are made of a pliable, self-extinguishing PVC material with a flash point of 320-390C.

Conform to: EN1598 for welding (fulfilling requirements on transmittance, reflectance, UV-stability and resistance to ignition).

Supplied with steel curtain rings.

Available in a range of sizes and colours.