A2 Lock Nuts

Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Conform to DIN 439B.

Metric

Kennedy® Fix-it Kits

3/32, 1/8, 5/32, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 & 3/4.

Push-On Fixes

Kennedy Quality Industrial Dowel Pins

Hardened and precision ground. Conform with BS 1804.

Metric

Sizes 3mm are manufactured from un-hardened silver steel, 4mm and above are high quality case hardened mild steel.

Washers

Bright Zinc plated. Single coil square section spring washers. DIN 7980.

Metric

N.B. Priced Individually - Standard Box Quantity = 100 Pieces

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 913.

Metric sizes - Flat Point - Self Colour

For use where parts are frequently reset. This style of point causes the least amount of damage to the component it locks on to. Can be used against hardened shafts, preferably with a ground flat for improved surface contact. Ideal for use as an adjusting screw and in thin wall thicknesses and on soft plugs.

Pozi Countersunk Woodscrew

A combination of 4CUT point, MULTIhead and patented ground serrations that makes a Spax screw one of the best woods screw on the market. The 4CUT point bores into wood and divides the fibres while the deep thread with ground serrations drive the screw on. This prevents the material from splitting. The patented MULTIhead has countersinking and stopping qualities at the same time. The ribs cut into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily. The ribs also help prevent thread stripping when fixing hinges etc. Spax screws give trouble free fastening in all varieties of materials: hard or soft wood, plastics or thin sheet metal.

Yellow Zinc Plated

Kennedy Professional Threading Inserts

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Threading Inserts (Metric)

Available in packs of 10 and 50.

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Bright Zinc Plated

Socket Head Button Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners. Dimensions to BS EN ISO 7380.

Metric Sizes - Bright Zinc Plated

Qualfast High Quality Screwed Studding

Colour-coded at each end of length for easy identification as shown.

Yellow = Metric
Green = BSF
Blue = UNF
Red = BSW
White = UNC
Orange = Grade 8.8
Black =
Stainless Steel

Mild Steel - Grade 4.6 Zinc-Plated - UNC