Socket Head Shoulder Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for replacing costly components such as shafts, pivots, guides, pins, linkages and trunion mountings. Also commonly used in the die mould industry. Maximum operating temperature (unplated): 300C. Dimensions to Body Diameter Tol h8.

Metric Sizes - Standard Self Colour

High Tensile Hexagon Head Bolts

UNC Thread. BS1768, Grade S. Self colour.

Inch (UNC) - Self Colour

High Tensile Hexagon Head Bolts

DIN 931, Grade 8.8.

Metric Sizes - Bright Zinc Plated

Matlock Wood Screws

For power driving into hard and soft wood, MDF and chipboard. Manufactured to reduce wood split. Heat-treated for high resistance to breakage. With an aggressive clean cutting single thread drives easily - even in MDF and chipboard. Passivated zinc plated and lubricated to aid penetration. 25 point angle usually needs no pilot.

Gold-ZP Fibre Board Woodscrews

Stainless Steel Hose Clips

All 304 stainless steel construction, manufactured under ISO9001 quality system. Kite marked to: BS5315:1991. Lloyd’s Type approved.

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 916.

Metric sizes - Plain Cup Point - Self Colour

For use against hardened shafts. Ideal for use in ductile castings such as zinc, aluminium etc. where high tightening torques are not practical.

High Tensile Hexagon Head Set Screws

High grade Alloy Steel to BS EN ISO 898 Grade 8.8. Suitable for all high tension applications. DIN 933.

Metric Sizes - Self Colour

Heavy Duty Stainless Steel Bolt Clamps

Heavy duty bolt clamps to DIN 3017 are specifically designed to give extremely high band tension for sealing pressure/suction lines with either steel or plastic reinforcement and high shore hardness. Reinforced loops withstand significantly higher torques and the mechanically locked closure has no welding points and therefore no contact corrosion. Bridge gives optimal hose protection and the robust band with rounded edges for protection against injuries and/or damage to the hose surface. The band, housing and screw are all made from high grade 316 Stainless steel.

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to ANSI B 18.3 - 1936 Series.

Inch (UNC) - Self Colour

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Self Colour