Socket Head Shoulder Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for replacing costly components such as shafts, pivots, guides, pins, linkages and trunion mountings. Also commonly used in the die mould industry. Maximum operating temperature (unplated): 300C. Dimensions to Body Diameter Tol h8.

Metric Sizes - Standard Self Colour

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Self Colour

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 913.

Metric sizes - Flat Point - Self Colour

For use where parts are frequently reset. This style of point causes the least amount of damage to the component it locks on to. Can be used against hardened shafts, preferably with a ground flat for improved surface contact. Ideal for use as an adjusting screw and in thin wall thicknesses and on soft plugs.

Metric Helicoil Hand Taps

For starting thread forms. The straight fluted taps are manufactured under size to reduce the load and wear on the finishing tap, suitable for difficult tapping operations or when close tolerance fits are required.

Roughing Taps

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. Dimensions to BS 2470.

Inch (BSW) - Self Colour

Kennedy Thread Repair

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Thread Insert Kits (BSP)

Each Kennedy Professional Thread Repair Wire Insert Kit is supplied complete with a Hand Tap, Inserting Tool and Inserts.

Spring Tension Pins

Carbon steel. Self colour.

Inch

A2 Stainless Steel - Button Head

A2 Stainless Steel - Button Head

Socket Head Countersunk Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to DIN7991.

Metric Sizes - Standard Self Colour

Matlock Masonry Nails

Corrosion-resistant hardened nails commonly used by carpet fitters, floor layers, floor fitters and are suitable for general construction applications.