Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN916.

Metric Sizes - Knurled Cup Point - Self Colour

For quick and permanent location of pulleys, collars and gears on shafts. Will hold fast even in poorly tapped holes. Interrupted profile of clamping face resists loosening due to vibration. Sizes above M6 are generally counterbored to provide maximum clamping efficiency.

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN916.

Metric sizes - Plain Cup Point - Stainless Steel

DIN916. For use against hardened shafts. Ideal for use in ductile castings such as zinc, aluminium etc. where high tightening torques are not practical.

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to ANSI B 18.3.

Inch (UNC) - Self Colour

Socket Head Shoulder Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for replacing costly components such as shafts, pivots, guides, pins, linkages and trunion mountings. Also commonly used in the die mould industry. Maximum operating temperature (unplated): 300C. Dimensions to Body Diameter Tol h8.

Inch (BSW) - Standard Self Colour

Shear Nuts

A high security permanent nut fastening. The hexagonal part of the nut shears off at a predetermined torque (as only the cone is threaded) leaving a tamper resistant cone fastening behind.

A2 Stainless Steel

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Self Colour

Matlock Wood Screws

For power driving into hard and soft wood, MDF and chipboard. Manufactured to reduce wood split. Heat-treated for high resistance to breakage. With an aggressive clean cutting single thread drives easily - even in MDF and chipboard. Passivated zinc plated and lubricated to aid penetration. 25 point angle usually needs no pilot.

Gold-ZP Fibre Board Woodscrews

Socket Head Countersunk Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to BS 2470.

Inch (UNC) - Standard Self Colour

Qualfast High Quality Screwed Studding

Colour-coded at each end of length for easy identification as shown.

Yellow = Metric
Green = BSF
Blue = UNF
Red = BSW
White = UNC
Orange = Grade 8.8
Black =
Stainless Steel

Stainless Steel A2 - Metric

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to ANSI B 18.3 - 1936 Series.

Inch (UNF) - Self Colour