Washers

Bright Zinc plated Repair/Mudguard/Penny washers. Mild steel.

Inch

N.B. Priced Individually - Standard Box Quantity = 100 Pieces

Spring Tension Pins

Carbon steel. Self colour.

Metric

Metric HeliCoil Inserts - Free Running

Thread Repair System. Provides effective means of reinforcing and repairing tapped threads. Widely used in automotive and aerospace industries with approvals from British Aerospace, CAA, Fairey, Lucas, MOD, Westland and other recognised organisations.

x2D

Kennedy Professional Threading Inserts

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Threading Inserts (Metric)

Available in packs of 10 and 50.

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. Dimensions to BS 2470.

Inch (BSW) - Self Colour

High Tensile Hexagon Head Bolts

DIN 931, Grade 8.8.

Metric Sizes - A2 Stainless Steel

Hexagon Full Nuts

Self colour. Conform to DIN 934.

Inch (BSW)

High Tensile Hexagon Head Set Screws

BSF Thread. BS1083. Grade R. Self colour.

RAWL® R-CAS Studs (Also suitable for all cartridge resin systems)

Rawlplug mild steel threaded rod and chisel point resin anchor stud, zinc plated. Ideal use with resin capsules & pump in resin.

Supplied with stud, nut, washer & 1 hexagon driver per box.



Stud thread size: M16.
Stud overall length: 190mm.
Nut diameter: 24mm.
Washer diameter: 30mm.
Studs per box: 10.

Metric Helicoil Hand Taps

For tapping through holes and blind holes. The lead chamfer permits easier starting and requires less torque than bottoming taps.

Finishing Taps