产品 / 紧固件/工具
编号：QFT6067033P
●产品描述：
Socket Head Countersunk Screws
Manufactured from stainless steel to prevent rusting or where high temperatures are a consideration. Dimensions to BS EN ISO 4762 DIN 912.
Metric Sizes - A2 Stainless Steel
编号：QFT6023308V
●产品描述：
Socket Set Screws
High tensile alloy steel. Grade 14.9. DIN 915.
Metric sizes - Dog Point - Self Colour
For permanent location of one part to another. The point is generally centre spotted and a location hole drilled in the shaft or ground flat where location is made.
编号：CTL6329310L
●产品描述：
High Tensile Hexagon Head Bolts
DIN 931. Grade 8.8.
Metric Sizes - A2 Stainless Steel
编号：QFT6010859G
●产品描述：
Socket Head Cap Screws
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. Dimensions to BS 2470.
Inch (BSW) - Self Colour
编号：QFT6009117H
●产品描述：
Low Head Socket Head Cap Screws
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. DIN 7984.
Metric Sizes - Self Colour
编号：QFT6011385P
●产品描述：
Socket Head Cap Screws
High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to ANSI B 18.3.
Inch (UNC) - Self Colour
编号：CTL6451157H
●产品描述：
Washers
Inch. Table 3 Light. BS4310. Plain edge.
Inch
N.B. Priced Individually - Standard Box Quantity = 100 Pieces
编号：KEN6501570K
●产品描述：
Kennedy Quality Industrial Dowel Pins
Hardened and precision ground. Conform with BS 1804.
Metric
Sizes 3mm are manufactured from un-hardened silver steel, 4mm and above are high quality case hardened mild steel.
编号：KEN6207807K
●产品描述：
Kennedy Professional Threading Inserts
Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.
Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.
Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.
For all dimensional specifications please refer to our catalogue.
Wire Threading Inserts (Metric)
Available in packs of 10 and 50.
编号：RAW6682133J
●产品描述：
Frame Fixings
Traditional RAWL design frame fixing giving a high
quality through fixing. Used for fixing timber or metal door
and window frames into stone, concrete, brickwork or blockwork. No marking out required - just drill straight through the frame.