Qualfast High Quality Screwed Studding

Colour-coded at each end of length for easy identification as shown.

Yellow = Metric
Green = BSF
Blue = UNF
Red = BSW
White = UNC
Orange = Grade 8.8
Black =
Stainless Steel

Brass

High Tensile Hexagon Head Set Screws

High grade Alloy Steel to BS EN ISO 898 Grade 8.8. Suitable for all high tension applications. DIN 933.

Metric Sizes - A2 Stainless Steel

Matlock Galvanised ELH Clout (Felt) Nails

Extra Large Head (ELH) clout nails , galvanised coated mostly used for felt materials i.e. shed roofs etc.

Kennedy Professional Threading Inserts

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Threading Inserts (UNF)

Available in packs of 10 and 50.

Hexagon Full Nuts

Self colour. Conform to DIN 934.

Inch (BSW)

Kennedy Thread Repair

Kennedy Professional Thread Repair Wire Inserts are the easiest and quickest inserts to install to repair damaged or worn threads, you simply screw the insert into the pre-drilled and tapped hole, until the drive tang breaks off. They can be used with plastics or other materials provided that the material is strong enough to withstand the expansion of the insert as the screw thread locks into the wall of the hole. They are also suitable for new applications where, because of their mechanical strength benefits their introduction may result in the use of thinner sections or lighter parent materials without sacrificing thread strength they can also be used for converting from metric to inch and vice versa.

Most inserts are 1.5x diameter for length. For example:- M6 is 9mm long.
Other lengths are available on request.

Available in Metric, UNC, UNF, BSF, BSP and BSW sizes.

For all dimensional specifications please refer to our catalogue.

Wire Thread Insert Kits (Metric)

Each Kennedy Professional Thread Repair Wire Insert Kit is supplied complete with a Hand Tap, Inserting Tool and Inserts.

Plastic Plugs

All-purpose cost effective fixing for medium and lightweight
applications in sound brickwork, blockwork etc.
Typical Applications:
Fixing central heating pipes, shelving, brackets, dado rails
and other woodwork. Securing light wall units and kitchen fittings.
Features:
1. Profiled body for extra grip.
2. Anti-rotation fins.
3. 3 colour-coded sizes for screws from 3-6mm (No.4-14).
Additional sizes for screws No.4-20.



Product Specification:
Desc. Screw size Length Hole dia. Box
Green 3-4.5 (No. 4- 8) 20 4.5 - - - 67-008
Pink 3.5-5 (No. 6-10) 25 5.5 - - - 67-012
Orange 4.5-6 (No. 8-12) 25 6.5 - - - 67-016
Grey 4.5-5 (No.8-10) 35 5.5 - - - 67-020
White 4.5-6 (No. 8-12) 35 6.5 - - - 67-024
Blue 5-6 (No.10-14) 35 8.0 - - - 67-028
Yellow 8-10 (No.16-20) 50 11. - - - 67-032
Clips carded or uncarded.
Yellow 3-5 (No. 4-10) 25 5 - 67-125 67-126
Red 3.5-5.5(No. 6-12)35 6 - 67-130 67-134
Brown 5-6 (No.10-14) 45 7 - 67-231 67-233

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to BS EN ISO 4762 DIN 912.

Metric Sizes - Self Colour

Socket Head Cap Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300°C. Dimensions to ANSI B 18.3.

Inch (UNC) - Self Colour

Socket Head Button Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners. UNC/UNF Dimensions to ANSI B 18.3. BSW/BA Dimensions to BS 2470.

Inch (UNF) - Standard Self Colour