Qualfast Internal Circlips

Circlips simplify designs and linked with lower installation costs are the ideal item for replacing more traditional fasteners. All are manufactured from carbon steel with a phosphate finish. External DIN 472.

High Tensile Hexagon Head Set Screws

High grade Alloy Steel to BS EN ISO 898 Grade 8.8. Suitable for all high tension applications. DIN 933.

Metric Sizes - Bright Zinc Plated

Kennedy Extractable Dowels

Extractable dowel pins complete with inner thread and slight flats for air release. DIN 7979D. EN 28735. ISO 8735. Material: AISI-52100 or DIN 1-3505 100 Cr 6. Hardness: 57-63 HRC.

Washers

Single coil square section spring washers. DIN 7980. Self colour.

Metric

N.B. Priced Individually - Standard Box Quantity = 100 Pieces

Kennedy® Fix-it Kits

M5, M6, M8, M10, M12, M14 & M16.

Nuts - Nylon Insert Metric

Metric Helicoil Hand Taps

For starting thread forms. The straight fluted taps are manufactured under size to reduce the load and wear on the finishing tap, suitable for difficult tapping operations or when close tolerance fits are required.

Roughing Taps

Socket Set Screws

High tensile alloy steel. Grade 14.9. DIN 913.

Metric sizes - Flat Point - Self Colour

For use where parts are frequently reset. This style of point causes the least amount of damage to the component it locks on to. Can be used against hardened shafts, preferably with a ground flat for improved surface contact. Ideal for use as an adjusting screw and in thin wall thicknesses and on soft plugs.

Nyloc Nuts

Zinc plated. Shakeproof. Available in Type P Inch and Type NE Inch (conforms to DIN 982).

Inch Type NE (UNF)

A2 Stainless Steel - Countersunk

Pin Hex security screws with internal pin within the socket - prevents the use of standard hex keys. Suitable for medium torque applications.

Zinc Protected Hose Clips

All mild steel zinc protected hose clip, manufactured under ISO9001 quality system. Kite marked to: BS5315:1991.