Zinc Protected Hose Clips

All mild steel zinc protected hose clip, manufactured under ISO9001 quality system. Kite marked to: BS5315:1991.

Pozi Countersunk Woodscrew

A combination of 4CUT point, MULTIhead and patented ground serrations that makes a Spax screw one of the best woods screw on the market. The 4CUT point bores into wood and divides the fibres while the deep thread with ground serrations drive the screw on. This prevents the material from splitting. The patented MULTIhead has countersinking and stopping qualities at the same time. The ribs cut into the wooden surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily. The ribs also help prevent thread stripping when fixing hinges etc. Spax screws give trouble free fastening in all varieties of materials: hard or soft wood, plastics or thin sheet metal.

Yellow Zinc Plated

Socket Head Button Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For materials that are too thin to countersink. Low head profile for a smooth finished appearance. Also suitable for non-critical loading requiring heat treated fasteners. UNC/UNF Dimensions to ANSI B 18.3. BSW/BA Dimensions to BS 2470.

Inch (UNC) - Standard Self Colour

Hexagon Full Nuts

Self colour. Conform to DIN 934.

Metric

Qualfast Aluminium Rivets

For all applications of blind riveting. Aluminium rivet head with steel mandrel. Medium strength, use with aluminium and where rust is a problem. Select grip based on thickness of material to be riveted.

Dome head.

Kennedy Quality Industrial Dowel Pins

Hardened and precision ground. Conform with BS 1804.

Metric

Sizes 3mm are manufactured from un-hardened silver steel, 4mm and above are high quality case hardened mild steel.

Socket Head Countersunk Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 10.9. Suitable for all high tensile applications. Maximum operating temperature (unplated): 300C. For applications that require a flush finished surface. Precisely controlled countersink angle allows maximum flushness and sidewall contact. Dimensions to BS 2470.

Inch (BSF) - Standard Self Colour

Hexagon Full Nuts

Self colour. Conform to DIN 934.

Inch (UNF)

Socket Head Shoulder Screws

High Grade Alloy Steel to BS EN ISO 898/1 Grade 12.9. Suitable for replacing costly components such as shafts, pivots, guides, pins, linkages and trunion mountings. Also commonly used in the die mould industry. Maximum operating temperature (unplated): 300C. Dimensions to Body Diameter Tol h8.

Inch (BSW) - Standard Self Colour

High Tensile Hexagon Head Set Screws

High grade Alloy Steel to BS EN ISO 898 Grade 8.8. Suitable for all high tension applications. DIN 933.

Metric Sizes - Self Colour