Rawlplug Concrete Screwbolt

Screw bolt for fixing in to masonry substrates, a high performance, heavy duty anchor which cuts it's own thread. A non-expansion fixing suitable for use near substrate edge where expanding products would damage the structure. Single piece design including forged Hex Head and Washer no assembly required before installation. Suitable Base Materials: wood, masonry (brick), concrete (cracked and non cracked).
Features and benefits;
High performance bolt using undercut technology.
Quick and easy installation.
Close edge and spacing distance installation parameters.
Removable and reusable.
Low expansion force in base material.

Rawl® Kemfix Resin Bonded Anchor System

R-Cas
Rawl R-CAS (Kemfix) is a high performance resin bonded anchor system that is used for safety critical, structural applications. It relies on the adhesion of the resin to the concrete and stud therefore providing an expansion-free anchorage. It can be used with studs or sockets in a wide range of solid base materials including stone, masonry, and concrete.

R-XPT Through Bolts

The versatile through fixing for use in a wide range of applications in concrete of 20N/mm2 and over. Embedding depth markings to ensure correct installation.
European Technical Approval. Zinc-plated.
Typical applications include - cladding restraint, curtain wall, balustrade, barriers, handrails, racking, structural steel, bollards.



N.B. Priced Individually - Standard Box Quantity = 50 Pieces

Hammer-In Fixings (Assembled)

For fast, repetitive fixing with minimal use of
screwdriver required. Reinforced screwhead facilitates
high knock-in loads with the added benefit of plug neck grip. Hammer in drive screw for fast installation. Extended expansion zone gives extra grip. Suitable for use in concrete, stone, brickwork and blockwork.

Concrete Screws

High tensile steel screw installed with an electric drill
and a T30 Torx screwdriver bit for a positive non slip
installation. Suitable for use in concrete, brickwork and stone.

R-XPT Through Bolts

The versatile through fixing for use in a wide range of applications in concrete of 20N/mm2 and over. Embedding depth markings to ensure correct installation.
European Technical Approval. Zinc-plated.
Typical applications include - cladding restraint, curtain wall, balustrade, barriers, handrails, racking, structural steel, bollards.



N.B. Priced Individually - Standard Box Quantity = 50 Pieces

RAWL® R-CAS Studs (Also suitable for all cartridge resin systems)

Rawlplug mild steel threaded rod and chisel point resin anchor stud, zinc plated. Ideal use with resin capsules & pump in resin.

Supplied with stud, nut, washer & 1 hexagon driver per box.



Stud thread size: M10.
Stud overall length: 130mm.
Nut diameter: 17mm.
Washer diameter: 21mm.
Studs per box: 10.

Hammer-In Fixings (Assembled)

For fast, repetitive fixing with minimal use of
screwdriver required. Reinforced screwhead facilitates
high knock-in loads with the added benefit of plug neck grip. Hammer in drive screw for fast installation. Extended expansion zone gives extra grip. Suitable for use in concrete, stone, brickwork and blockwork.

Interset Heavy Duty Cavity Fixings

For fixing heavy objects securely in a variety of board
materials. Fixtures can be removed and re-fitted - such as
radiators for painting behind. Can be installed with a setting tool or by using a screwdriver. Hinged legs spread load over wide area for extra load capacity. Supplied with panhead screw.

Rawl Rawlbolt Heavy Duty Masonry Anchors

Ideal general-purpose anchor bolts with excellent tolerance to variation in hole size. The collapsible ferrule ensures positive clamping force is transmitted to the fixture. Suitable for use in concrete, brickwork and stone. Typical applications for heavy duty anchors include roller shutter doors, fire doors, steelwork, security grills, machinery, pipework/ducting supports.

For all dimensional specifications please refer to our catalogue.

Bolt Projecting

N.B. Priced Individually - Standard Box Quantity = 50 Pieces