Spare Nozzles for Desoldering Tool DSGPRM (KEN-516-8500K)

Pack of 5

Kennedy® Butane Soldering Tool Kit

Supplied in robust plastic case.
Contents:
BS075 butane soldering iron, tip cleaning sponge, eight interchangeable tips: 2.4mm single flat, 1, 2.4, 3.2, 4.8 double flat, hot air blower, hot knife and hot air deflector.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS125 soldering iron.

Kennedy® Val-U-Vac Desoldering Tools

Removal of molten solder is achieved by the spring loaded piston creating a vacuum in the barrel of the tool. Both models have extraction springs located outside of the vacuum chamber and PTFE nozzles to prevent solder sticking. With safety shield. Nozzle size: 3mm OD x 1.5mm ID x 20mm long.

Anti-Static Val-U-Vac

With carbon impregnated tip and body to prevent solder adhesion and dispel static. Conforms with CECC 15.

Kennedy® Soldering Irons

Thermo-plastic handles, designed for comfort and a firm safe grip. The mains lead is held by a cable clamping screw which eliminates the strain on electrical connections. All supplied complete with a double flat nickel plated tip and 13 amp 3-pin plug with 1.5m power lead as standard. Manufactured to BS 3456. All 230V.

25 Watt Soldering Iron

An all-purpose soldering iron for general electrical repairs in the workshop.

Kennedy® Multi Angle Vice

Aluminium vice with a lockable multi-positionable ball joint, cast steel clamp and swivel mechanism. Horizontal/vertical grooved jaw is designed to hold irregular shaped objects. Removable jaw rubber covers for protecting delicate components. Will clamp to surfaces of 5 to 50mm thickness. Jaw width of 74mm. Upright: Rotates through 360° and the vice can swivel between 45° and 135°. Right angles: Vice can be rotated through 360°.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS075 soldering iron.

Kennedy® Butane Soldering Iron Tips

Interchangeable tips for use with Kennedy® BS075 soldering iron.

Kennedy® Butane Soldering Iron

BS050
Flint type ignition which is built into the cap. Uses standard butane lighter fuel and is simple to refill. Fully adjustable tip temperature control with a safety fuel cut-off when cap is replaced. Textured anti-slip barrel. Supplied with pointed soldering tip. Can be used with double flat, hot air, flame and hot knife, can also be used as a blow torch. Supplied without fuel.

Power rating: 50W.
Soldering temperature: 375°C.
Run time: 60 minutes.
Overall length with cap: 195mm.
Overall length with soldering tip: 180mm.

Kennedy® Val-U-Vac Desoldering Tools

Removal of molten solder is achieved by the spring loaded piston creating a vacuum in the barrel of the tool. Both models have extraction springs located outside of the vacuum chamber and PTFE nozzles to prevent solder sticking. With safety shield. Nozzle size: 3mm OD x 1.5mm ID x 20mm long.

Professional Desoldering Tool DSGPRM

With a robust anodised aluminium body and steel plunger suitable for professional use. Removal of molten solder is achieved by the spring loaded piston creating a vacuum in the barrel of the tool. With extraction spring located outside of the vacuum chamber and PTFE nozzle to prevent solder sticking. With safety shield. Nozzle size: 3mm OD x 1.5mm ID x 20mm long.