Copely Nylon Tubing

NMF Eurlon Series
Eurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, on machinery utilising the latest technical improvements in extrusion calibration. Eurolon industrial tubing has low moisture absorption when compared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidity conditions. Eurolon tubing is seamless in construction with a smooth high gloss inner and outer surface. It is light, approximately one ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applications such as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls. Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified in addition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metric dimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grade meets the requirements of government regulations with regard to materials and articles in contact with food under UK Statutory instrument 1978 No.1927. Eurolon tubing is available for higher temperature applications, with heat resisting additives in both semi rigid and flexible grades, subject to minimum manufacturing quantities. Available in several colours: black, blue, natural, green, red and yellow.

Special features:
Resistant to a wide range of chemicals.
Silicone-free.
Excellent abrasion resistance.
Mirror smooth inner for improved flow.
Made from virgin polymer type 12.
Produced to exacting tolerances.
Supplied in 30 metre coils.

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.

TU Series

Temperature range: -20C to +60C.
29 colours available.
Operating pressure: 0.6Pa.
Prices shown are for 20m coils - 100m coils also available.
Also available in nylon and flame resistant.

Copely Nylon Tubing

NMF Eurlon Series
Eurolon industrial nylon tubing is extruded from polyamides 11 and 12 to precise dimensional tolerances, on machinery utilising the latest technical improvements in extrusion calibration. Eurolon industrial tubing has low moisture absorption when compared with other polyamides, ensuring consistent flexibility over a wide range of temperature and humidity conditions. Eurolon tubing is seamless in construction with a smooth high gloss inner and outer surface. It is light, approximately one ninth the weight of copper and flexible, facilitating ease of installation. It is ideally suited for applications such as fuel lines, oil lines, petrol tank breather sheaths, pneumatic controls, bleed lines and brake controls. Eurolon industrial nylon tubing conforms to S.M.M.T. standard NM7B, 1968 and C2C in dimensions specified in addition to SAEJ844 3A (unreinforced) and 3B (reinforced) types, (3B available by special order). Metric dimensions conform to BS5409 with respect to all technical details. Eurolon type 11 nylon in semi rigid grade meets the requirements of government regulations with regard to materials and articles in contact with food under UK Statutory instrument 1978 No.1927. Eurolon tubing is available for higher temperature applications, with heat resisting additives in both semi rigid and flexible grades, subject to minimum manufacturing quantities. Available in several colours: black, blue, natural, green, red and yellow.

Special features:
Resistant to a wide range of chemicals.
Silicone-free.
Excellent abrasion resistance.
Mirror smooth inner for improved flow.
Made from virgin polymer type 12.
Produced to exacting tolerances.
Supplied in 30 metre coils.

Copely Polyurethane Tube

CPU Series
Codeflex polyurethane tube is suitable for a wide range of applications demanding a flexible and cut resistant tube in applications such as pneumatic control systems and chemical transfer tubing. Codeflex polyurethane is well suited to applications demanding maximum kink resistance, minimum kink memory. It is suitable for fitting into confined spaces where conventional tubes lacking the above factors would increase fitting time in addition to flow restriction.

Applications:
Pneumatic control systems.
Fuel and lubrication lines.
Chemical transfer tubing.
Special features:
Exceptional abrasion resistance.
Resistance to a wide range of chemicals.
High flexibility.
Silicone-free.
Working pressures:
Nominal working pressure calculated at 23C with a 4.1 safety factor.
Temperatures: -50C/55C (short term use at 85C).
Special note:
The CPU series has been designed and developed to meet the exacting standards of the push fit type of coupling.
Supplied as 30 metre coils.

Kennedy® Industrial Quality Airline Hose

Open drum 20M air hose reel. Easy wind reel mechanism. With high impact resistant drum and guide walls. 1/2" air hose fitted with two ear hose clips and standard PCL couplings for 1/2" hose. The axial supply allows the hose to be wound and unwound during operation. Supplied complete with 1.5M supply connection hose and wall mounting hooks.

Through Flow Air Hose

Copely Industrial Layflat Hose

LH Series
Light duty blue industrial layflat - LH series. General-purpose hose especially suitable for drainage of locations with relatively small differences in elevation; for temporary water supply: for sprinkler irrigation or due to its resistance to most chemicals, for spreading liquid fertilisers and agricultural chemicals. Colour Blue.

Special features:
Made from cadmium free materials.
Resistance to a wide range of chemicals.
Silicone free.
Abrasive resistant.
Good flexibility.
Long service life.
Minimal electrical conductivity.
Tough, puncture-proof.
Fast transfer of liquids.
Unaffected by the elements.
Operating temperature: -25C/60C.
Supplied in 10 metre coils.

Light Duty Blue

Kobe™ Retractable Air Hose Balancer

With adjustable tension return retracts when the air tool is released leaving the work place clear of unwanted lengths of air hose. Ideally suited for in-line production. With spring loaded safety clip for overhead fixing.



Hose length: 1.5m
Hose I.D: 5mm
Hose O.D: 8mm
Max pressure: 200psi
Hoist range: 0-1.5kg

Copely Suprene Air Hose

GP1 Series
Suprene GP1 air hose is a unique combination of rubber and PVC to produce Rubber PVC alloy (TPE). This innovative step has resulted in the introduction of Codeflex supreme GP1 air hose. This hose feels and looks like rubber without the associated negative aspects. Codeflex Suprene GP1 is fully flexible and is available from 5mm through to 25mm.
The smaller diameters are black with yellow stripe and 13mm and above are in opaque yellow outer sheath.
Improved fire retardancy. Tested to BS 2782 Part 1, method 141A on sample cut to 6mm wide. GP1 range has a CO1 rating of 25% O2. Conforms to ISO 5774: 1980.

Special features:
Abrasion resistance excellent.
Outstanding resistance to ageing.
Manufactured from cadmium free materials.
Resistance to a wide range of chemicals.
Good flexibility.
Reduced plasticizer migration.
Good kink resistance.
Improved resistance to oil/fuels.
Outstanding U.V/Ozone resistance.
Silicone free.
Working temperature -30C to 60C.

Copely Industrial Layflat Hose

LHM Series
Medium duty yellow industrial layflat hose - LHM series. Medium pressure, flat hose manufactured from plasticized PVC and reinforced with polyester yarns. For conveyance of water, other liquids or fertilizers. Also suitable for irrigation systems, sprinklers and water supply. Colour Blue.

Special features:
Made from cadmium free materials.
Resistance to a wide range of chemicals.
Silicone free.
Abrasive resistant.
Good flexibility.
Long service life.
Minimal electrical conductivity.
Tough, puncture-proof.
Fast transfer of liquids.
Unaffected by the elements.
Operating temperature: -25C/60C.
Supplied in 10 metre coils.

Medium Duty Yellow