Araldite 2022 - Toughened, Resilient Methacrylate for Thermoplastics

Versatile, excellent for a wide range of plastics, composites and metals. Excellent resistance to petrol and oils. Tolerant to less pre-treatment. Rapid cure. Ideal for GRP /SMC / GRE / Thermoset Composites, ABS / PVC, Acrylics, Polycarbonate, Polyamides, Polystyrene Foams, PU foams etc. Light handling strength at 18 minutes. Gap filling up to 4mm thickness

Epoxy Rapid Tubes

• Gives a strong bond in seconds.
• Ideal for use on ceramics, wood, chipboard, glass, metal and most hard plastics.
• 2x 15ml tubes.

Araldite 2015 - Toughened Epoxy Paste

Thixotropic with good gap filling properties. Non sagging up to 10 mm thickness. Toughened, high sheer & peel strength. Ideal for bonding dissimilar substrates. Particularly suitable for SMC and GRP bonding. Also Ferrous metals, aluminium, copper etc. Light handling strength at 4 hours.

Loctite 403? Prism Instant Adhesive

Loctite 403? Prism High viscosity, low odor/low bloom, surface insensitive, one part room temperature cure, instant adhesive designed for applications with high cosmetic appearance and/or where vapor control is difficult.
Health and Safety friendly.

Epoxy Control Tubes

• Extra strong, long lasting bond but repositionable for up to 2 hours.
• Ideal for large areas and assembling a number of components on metal, wood, masonry, ceramics, glass and most hard plastics.
• 2x 15ml tubes.

Instant Adhesive

General purpose, for metals.

496 Medium Viscosity.

Fast Cure Structural Adhesive (Pk-10)

Fast cure structural adhesive that combines clarity, toughness and excellent adhesion to plastics, metals and composites. 50ml syringe with static mixer for a controlled and accurate mix ratio.

Handling strength <3mins
Gel time - Approximately 1 min
Gap Fill - 2-3mm
2 part Acrylic Technology - cures quickly
Excellent bond strength and toughness on a wide range of substrates
50ml syringe with static mixer for controlled accurate mix ratio

638* - High Strength Retainer

For heavy duty applications on cylinder liners, splines, structural tubing, drive keys etc. High viscosity. Available in 3ml, 50ml and 250ml. *Replaces 635.

Araldite 2015 - Toughened Epoxy Paste

Thixotropic with good gap filling properties. Non sagging up to 10 mm thickness. Toughened, high sheer & peel strength. Ideal for bonding dissimilar substrates. Particularly suitable for SMC and GRP bonding. Also Ferrous metals, aluminium, copper etc. Light handling strength at 4 hours.