Loctite 4062 - Instant Adhesive / Ultra Fast Curing

Ideal for highest speed bonding of plastic, metal and rubber. Use with 770 polyolefin primer for difficult to bond plastics. Perfect for bonding material to lampshade frames, bonding small plastic ornaments/symbols to plastic base, rubber strips to clamp faces, rubber end pieces to plastic tubes and high strength locking of plastic fasteners. Replaces 420 and 493. Available in 20g or 50g.

Specifications: operating temperature up to 80°C.
Fixture time (on steel): 3-20sec.
Viscosity mPa.s: 2.
Especially for metal/plastics.

Loctite 401 - General-Purpose Instant Adhesive

For bonding ceramics, aluminium, steel, leather, fabric and paper in seconds. Maximum operating temperature: 120°C. NSF P1 registered. Available in 3g, 20g and 50g.

243* Nutlock Threadlocker

Medium strength. Works on all metals including chrome free platings, Improved temperature resistance (180C) and heat aging, improved oil tolerance, Prevents loosening on parts such as pumps, motor mounting bolts, gearboxes or presses.

Loctite A+B Dual Cartridge 50ml

Loctite Hysol 9483 A&B is a general purpose, 2K-Epoxy adhesive, suitable for bonding and putting where optical clarity and high strength are required. Ideal for bonding decorative panels and displays.

Working time: 25-60min.
Fixture time: 210min.
Viscosity in Pa-s: 7.
Tensile strength: 47N/mm².
Peel strength: 1.5N/mm.
Service temperature range: -50°C - +150°C.
Colour mix: ultra clear.

Instant Adhesive

A high viscosity ethyl cyanoacrylate adhesive for general- purpose bonding of rubber, plastic and metal. Replaces 415, 416 and 422.

431 - High Viscosity

495 - Low Viscosity Instant Adhesive

Thin easy flowing general-purpose instant adhesive. Suitable for close fitting small components and parts bonding on rubbers, plastics and metals. Anvailable in 20g and 50g.

278 High Strength Oil Tolerant Threadlocker

Invented by Henkel Loctite as a revolutionary method to lock and seal threaded fasteners, Loctite Threadlockers have found wide acceptance in a range of applications - from delicate electronic components to heavy construction equipment. Loctite Threadlockers are available in varying viscosities and strengths for virtually any application, including exposure to extreme environments.



High strength threadlocker which can be used on as received parts and on applications where operating temperatures can reach 200C. It is also ideal for use on plated bolts including the new zinc/trivalent chrome finishes.

Toughened Epoxy

Good gap fill. High peel strength. Fixture time 4 hours.

Hysol 9461

2701* Studlock Threadlocker

To replace interference studs etc. Also removes the need for blind holes for studs in oil filled castings. Requires light torque for removal. *Replaces 270.

7240 Activator

Increases cure speed on passive and inactive surfaces. For large bond gaps. For low (<5°C) temperature curing.