Loctite 4062 - Instant Adhesive / Ultra Fast Curing

Ideal for highest speed bonding of plastic, metal and rubber. Use with 770 polyolefin primer for difficult to bond plastics. Perfect for bonding material to lampshade frames, bonding small plastic ornaments/symbols to plastic base, rubber strips to clamp faces, rubber end pieces to plastic tubes and high strength locking of plastic fasteners. Replaces 420 and 493. Available in 20g or 50g.

Specifications: operating temperature up to 80°C.
Fixture time (on steel): 3-20sec.
Viscosity mPa.s: 2.
Especially for metal/plastics.

Loctite 401 - General-Purpose Instant Adhesive

For bonding ceramics, aluminium, steel, leather, fabric and paper in seconds. Maximum operating temperature: 120°C. NSF P1 registered. Available in 3g, 20g and 50g.

High Strength Threadlocker

Medium and high strength threadlockers that once cured offer excellent resistance against most industrial chemicals. They achieve good thermal resistance, withstanding continuous operating temperatures up to 150C. Both of these products retain the customary high Loctite performance with a "white" bill health and safety bill meaning no hazard symbols, no risk phrases and ultimately no need for COSHH assessment.

N.B. 2400 (medium strength) and 2700 (high strength) threadlockers illustrated.

2700

2700: High strength threadlocker that is fluorescent green with a viscosity of 500 mPa?s and a shear strength of 18N/mm.

290 - Penetrating Threadlocker

High strength, post application with very low viscosity. Vibration proof. WRC approved.

Medium Strength Threadlocker

Medium and high strength threadlockers that once cured offer excellent resistance against most industrial chemicals. They achieve good thermal resistance, withstanding continuous operating temperatures up to 150C. Both of these products retain the customary high Loctite performance with a "white" bill health and safety bill meaning no hazard symbols, no risk phrases and ultimately no need for COSHH assessment.

N.B. 2400 (medium strength) and 2700 (high strength) threadlockers illustrated.

2400

2400: Medium strength threadlocker Loctite that is fluorescent blue with a viscosity of 3000 mPas and a shear strength on steel of 9 N/mm.

Activator Kit

50ml Tube with 40ml Aerosol of 7388 Activator.



20251 - (with 25gm 7387 activator)
This multi-purpose adhesive suits bonding needs including metal bonding, ID plates and signage. Two part no mix, fast curing and toughened with good moisture, impact resistance and peel strength.
(50ml kit includes 7387 activator 25mg).

770 Polyolefin Primer

Materials such as polypropylene, polyethylene, and thermoplastic rubber are normally difficult to bond. This material makes them suitable for bonding with Loctite cyanoacrylate adhesives.

2701* Studlock Threadlocker

To replace interference studs etc. Also removes the need for blind holes for studs in oil filled castings. Requires light torque for removal. *Replaces 270.

7386 - Multi-bond Activator

This activator is designed to promote the cure of Loctite toughened acrylic adhesives Multi-bond 329 and 330.

Instant Adhesive

Standard: Household size instant adhesive for bonding metals, rubber, plastic and most non-porous materials in seconds.

Super Glue