Loctite 9466 A+B Dual Cartridge

Loctite Hysol 9466 A&B is a toughened, 2K-Epoxy adhesive, suitable for multi purpose applications requiring long open time and high bonding strength. Ideal for a wide variety of substrates like metals, ceramic and most plastics.

Working time: 60min.
Fixture time: 180min.
Viscosity in Pa-s: 35.
Tensile strength: 32N/mm².
Peel strength: 8N/mm.
Service temperature range: -55°C - +120°C.
Colour mix: off-white.
Pack sizes: 50ml, 400ml.

290 - Penetrating Threadlocker

High strength, post application with very low viscosity. Vibration proof. WRC approved.

Revolutionary High Gap Fill Adhesive

Loctite 3090 represents the latest development in 2-Component adhesive technology combining high gap filling properties with high bond strength and fast cure

Gap filling up to 3mm
Gel based, non-drip formula
Excellent bonding characteristics on a wide variety of substrates
Innovative 2-component technology
Size 10gm

Medium Strength Threadlocker

Medium and high strength threadlockers that once cured offer excellent resistance against most industrial chemicals. They achieve good thermal resistance, withstanding continuous operating temperatures up to 150C. Both of these products retain the customary high Loctite performance with a "white" bill health and safety bill meaning no hazard symbols, no risk phrases and ultimately no need for COSHH assessment.

N.B. 2400 (medium strength) and 2700 (high strength) threadlockers illustrated.

2400

2400: Medium strength threadlocker Loctite that is fluorescent blue with a viscosity of 3000 mPas and a shear strength on steel of 9 N/mm.

Loctite Super Glue with Brush 5gm

The innovative easy to use instant adhesive.
The brush on applicator allows you to easily control the amount of glue and to spread it perfectly over any size of surface.
The bottle insert wipes excess glue from the brush and prevents spillage. 5g bottle.

648 - Engineering Adhesive

Suitable for use at continuous working temperature of up to 175C. Can fill gaps of up to 0.15mm. High shear strength, medium viscosity and solvent resistant.

7031 Quick Clean

Neutralises acidic surfaces on the work surface and removes alkaline deposits left by soda or ammonia based solutions which weaken the bond of the adhesive.

Loctite 406 - Prism Cyanoacrylate Adhesive

For rubber, plastics, EPDM, nitrile and neoprene. Replaces 495, 414 and 424. Use with Polyolefin Primer 770 for difficult to bond plastics and rubber such as polypropylene, silicone etc. Available in 20g, 50g and 500g. Maximum operating temperature: 120°C.

495 - Low Viscosity Instant Adhesive

Thin easy flowing general-purpose instant adhesive. Suitable for close fitting small components and parts bonding on rubbers, plastics and metals. Anvailable in 20g and 50g.

2701* Studlock Threadlocker

To replace interference studs etc. Also removes the need for blind holes for studs in oil filled castings. Requires light torque for removal. *Replaces 270.