Loctite 415 - General-Purpose Instant Adhesive

Loctite 415 a high viscosity cyanoacrylate, general-purpose adhesive and is particularly suited to bonding of metals, rubbers and plastics. Available in 20g, 50g and 500g.

648 - Engineering Adhesive

Suitable for use at continuous working temperature of up to 175C. Can fill gaps of up to 0.15mm. High shear strength, medium viscosity and solvent resistant.

Loctite 272 High Temperature Threadlocking Compound

Loctite 272 High Temperature High Strength Threadlocking Compound



Designed for the permanent locking and sealing of threaded fasteners. Cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Typical applications include the locking and sealing of large bolts and studs (M25 and larger).

Instant Adhesive

Black, toughened adhesive. For small metal parts where the bond must endure heavy peel loads.

480 - Toughened

7031 Quick Clean

Neutralises acidic surfaces on the work surface and removes alkaline deposits left by soda or ammonia based solutions which weaken the bond of the adhesive.

Loctite 406 - Prism Cyanoacrylate Adhesive

For rubber, plastics, EPDM, nitrile and neoprene. Replaces 495, 414 and 424. Use with Polyolefin Primer 770 for difficult to bond plastics and rubber such as polypropylene, silicone etc. Available in 20g, 50g and 500g. Maximum operating temperature: 120°C.

Loctite 415 - General-Purpose Instant Adhesive

Loctite 415 a high viscosity cyanoacrylate, general-purpose adhesive and is particularly suited to bonding of metals, rubbers and plastics. Available in 20g, 50g and 500g.

638* - High Strength Retainer

For heavy duty applications on cylinder liners, splines, structural tubing, drive keys etc. High viscosity. Available in 3ml, 50ml and 250ml. *Replaces 635.

222 Screwlock Threadlocker

Low strength, replaces nylon/star/spring washers on screws and threaded fitting where easy dismantling is required, e.g. with a screwdriver. NSF P1 registered.

Fast Cure Structural Adhesive (Pk-10)

Fast cure structural adhesive that combines clarity, toughness and excellent adhesion to plastics, metals and composites. 50ml syringe with static mixer for a controlled and accurate mix ratio.

Handling strength <3mins
Gel time - Approximately 1 min
Gap Fill - 2-3mm
2 part Acrylic Technology - cures quickly
Excellent bond strength and toughness on a wide range of substrates
50ml syringe with static mixer for controlled accurate mix ratio