Digimatic Tube Micrometer

Series 395 Digimatic Output 1 Spherical Face Model

395-351
Designed to measure wall thickness of various types of tubing etc.

Features:
Two spherical face and vertical pin type models also available.
Large LCD display.
IP65 rating.
Inch/metric conversion.
Zero setting.
Origin setting.
Data hold.
Data output.
Auto power off.
Tungsten carbide tipped measuring faces.
Spindle lock.

Range: 0 - 25mm/0 - 1?.
Accuracy: 2m .
Resolution: 0.001mm/0.00005?.

Digimatic Point Micrometer

Pointed anvil and spindle for measuring the web thickness of drills, small grooves, keyways etc.

• 0.3mm radius on anvil
• Large LCD display
• Imperial/Metric conversion
• Origin setting
• Zero setting
• Data hold
• Data output
• Auto power off
• Clear graduations on satin chrome finish
• Spindle lock
Accuracy: +/- 2 mu m
Measuring Faces: Parallelism - 3 mu m
Resolution: 0.00005"/0.001mm

Digimatic Caliper

Inch/metric conversion. Zero set at any point. SPC data output. Round measuring faces for accurate ID measurement. Power supply - battery 1 off SR44. - Supplied

550 Series

Resolution 0.01mm/ 0.0005"

Digimatic Depth Gauge

Designed for measuring the depth of holes, narrow grooves and steps. Provided with data output for SPC systems. Uses IDC Digimatic Indicator. Both models supplied with 4 rods. Power supply: Batteries 2 off SR44 (PAN-904-5020K). Resolution: .0005"/0.01mm.

Series 547 "ABSolute"

Digimatic Caliper

Inch/metric conversion. Zero set at any point. SPC data output. Round measuring faces for accurate ID measurement. Power supply - battery 1 off SR44. - Supplied

550 Series

Resolution 0.01mm/ 0.0005"

Water Resistant Digimatic External Micrometers

6 models of water resistant micrometers suitable for use in areas where there is a high risk of coolant splash. Large LCD display. Inch/metric conversion. Origin setting. Auto power off. IP-65 coolant proof. Tungsten carbide tipped measuring faces. Conform to BS 870. Resolution: 0.001mm/0.00005".

Accuracy:
0 - 75mm plus/minus 1 mu m.
75 - 100mm plus/minus 2 mu m.
Flatness: 0.3 mu m.
Parallelism:
0 - 50mm 1 mu m.
50 - 100mm 2 mu m.

293 series

Mitutoyo Depth Micrometer - HDS Type

329 Series
The six rods are adjustable in either direction for calibration and wear compensation.
Base length: 100mm.
Rod: diameter - 4mm.
Measuring length per rod: 1?/25mm.
Power supply: battery 1x SR44
Order Code PAN-904-5020K supplied.

Accuracy:
Flatness of reference face (base): 2m.
Flatness of measuring face of rod: 0.3m.
Parallelism between reference face and measuring face: (4+L/50)m (fraction rounded up).
Zero point error of rod: (2+L/75)m (fraction rounded up).
Instrument error: 3m.

Series 543 Digimatic Indicator - Type IDC

543-401B
Simple to use yet powerful features make this Indicator an exceptionally productive instrument for many applications.

Range: 0 - 12.7mm/0 - 0.5".
Accuracy:
0.02mm/0.0008".
Features:
Large LCD display,
Inch/metric conversion.
ABSolute feature.
Direction change.
Zero setting.
On/off.
Preset.
Tolerance setting.
Data output.
Magnified judgement results.
330° bezel rotation.
Resolution:
0.01mm/0.0005".

Digimatic Depth Gauges

Designed for measuring depth of hole, slots and recesses. Can be fitted with an extension base to extend its span. Base size 100mm. Functions: Inch/metric conversion. zero at any point. SPC data output. Power supply: Battery 1 off SR44 (PAN-904-5020K). Resolution: 0.0005"/0.01mm

Series 571 "ABSOLUTE"

Quickmike ABSOLUTE Digimatic Micrometer

The Quickmike provides a speedy spindle feed of 10mm/.4” per thimble rotation as compared to the conventional micrometer with 0.5mm/.025” per rotation. Its wide 30mm/1.2” measuring range allows various workpieces with different shapes to be measured quickly.
Non-rotating spindle and the new ratchet friction thimble.
Speedy spindle feed of 10mm/rev.
With absolute linear scale.
IP54 dust/water protection (when not connected with data output cable).
With SPC data output.
With a standard bar to set the origin point (for models with a range over 30mm/1.2”).
Supplied in fitted plastic case.


Technical Data
Resolution: 0.001mm or .00005"/0.001mm
Flatness: 0.3µm/.000012”
Parallelism: 2µm/.00008” for models up to 80mm/3.2” 3µm/.00012” for models up to 105mm/4.2”
Measuring faces: Carbide tipped
Display: LCD
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 3 years under normal use
(1 year for models over 30mm / 1.2”)
Dust/Water protection level: IP54

Function
Origin-set, Zero-setting, Data hold, Data output, inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error



Range: 0 - 30.8mm/0 - 1.2"
Accuracy: ±.0001"