Water Resistant Digimatic External Micrometers

6 models of water resistant micrometers suitable for use in areas where there is a high risk of coolant splash. Large LCD display. Inch/metric conversion. Origin setting. Auto power off. IP-65 coolant proof. Tungsten carbide tipped measuring faces. Conform to BS 870. Resolution: 0.001mm/0.00005".

Accuracy:
0 - 75mm plus/minus 1 mu m.
75 - 100mm plus/minus 2 mu m.
Flatness: 0.3 mu m.
Parallelism:
0 - 50mm 1 mu m.
50 - 100mm 2 mu m.

293 series

Standard Type Digimatic External Micrometers

Micrometers of ranges up to 100mm (4") are `One touch Preset Type` others above 100mm (4") `All-digit Preset Type`. Two measuring modes - ABS (absolute) and INC (incremental). Functions include: Origin setting, Zero setting, Data hold, Error alarm, Auto-sleep and SPC Data output. Supplied with ratchet stop and ratchet thimble. Battery: 1 off SR44 - (938882) - supplied. Accuracy: Parallelism: 1mm for up to 50mm, 2mm 50-100mm (2L/100)mm for over 100mm (fraction rounded up). Flatness: 0.3 mu m. L equals maximum measuring length. Resolution: 0.001mm/0.00001".

293 series

Digimatic Type Absolute Calipers

With SPC Data output. Inch/metric conversion. On/Off. Zero set at any point. Data/Hold facility. Complete with power supply battery 1 off SR44.

500 series

Resolution 0.01mm/0.0005"

Digital Indicators

Series 543 - Type IDC
Displays spindle movement digitally by means of a linear encoder.
Dial rotates through 330 for easy reading.
Inch/metric conversion.
Self-contained power supply.
Pre-set and zero-setting (ABS/INC).
Data output and direction changeover facilities.

Range: 0 - 12.7mm/0 - 0.5".
Accuracy: 0.003mm /0.00012".
Resolution: 0.001mm/0.00005".

Series 543 - Type IDC

MDC Light Digimatic External Micrometers

Large LCD display. Imperial/Metric conversion. Lightweight construction. Easy single handed operation. Tungsten carbide tipped measuring faces. Accuracy: plus/minus 2mm.

293 series

Resolution: 0.001mm/0.00005"

'QuantuMike' - Coolant Proof Micrometer

Rapid Measurement by using a coarser thread which feeds the spindle by 2mm per revolution. Dust/Water Resistance With IP65 Protection Level. Equipped with a function lock feature to prevent the origin point being moved by mistake during measurement.
Model No: 293-185.
Resolution: .00005?/0.001mm
Accuracy: .00005?/1m
Measuring range:
0-1?/25-50mm

Type IDF

Reflective photoelectric linear encoder with no mechanical amplification for unsurpassed durability. High measuring accuracy. Digimatic output to SPC systems. Preset, zero set and tolerance setting, inch/metric conversion (on inch/metric models) and direction changeover. Also go/ng judgement, data load, error alarm, mean value, maximum/minimum, runout measurement and on/off function.

Mitutoyo Depth Micrometer - HDS Type

329 Series
The six rods are adjustable in either direction for calibration and wear compensation.
Base length: 100mm.
Rod: diameter - 4mm.
Measuring length per rod: 1?/25mm.
Power supply: battery 1x SR44
Order Code PAN-904-5020K supplied.

Accuracy:
Flatness of reference face (base): 2m.
Flatness of measuring face of rod: 0.3m.
Parallelism between reference face and measuring face: (4+L/50)m (fraction rounded up).
Zero point error of rod: (2+L/75)m (fraction rounded up).
Instrument error: 3m.

Digimatic Point Micrometer

Pointed anvil and spindle for measuring the web thickness of drills, small grooves, keyways etc.

• 0.3mm radius on anvil
• Large LCD display
• Imperial/Metric conversion
• Origin setting
• Zero setting
• Data hold
• Data output
• Auto power off
• Clear graduations on satin chrome finish
• Spindle lock
Accuracy: +/- 2 mu m
Measuring Faces: Parallelism - 3 mu m
Resolution: 0.00005"/0.001mm

Digimatic Type Absolute Calipers

With SPC Data output. Inch/metric conversion. On/Off. Zero set at any point. Data/Hold facility. Complete with power supply battery 1 off SR44.

500 series

Resolution 0.01mm/0.0005"