Allied Maxcut Series 5-6 Holders

Diameter range: 87.76 to 114.48mm.

For all dimensional specifications please refer to our catalogue.

Taper Shank

Spare Reverse Clutches

To suit Indexa-Seiki tapping heads.

Dijet Mirror Ball Cutters

Spare screws for Mirror Ball Cutters.

For all dimensional specifications please refer to our catalogue.

Granlund HSS Size 1 Counterbores

Type W. HSS. Tolerence P8.

Counterbores W with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.

For further specifications please refer to our catalogue.

Allied Maxcut Structural Steel High Performance Drill Inserts

The Structural Steel Drilling system combines the GEN3SYS High Penetration Drilling System and the flexible T-A replaceable Insert Drill System. Linked to dedicated holders these two systems provide the most comprehensive solution available for fast and accurate drilling in all grades of structural steel used in RSJs and ?I? section beams, including thin wall sections and plate.
Compatible with: Kaltenbach/APS - FICEP - Peddinghaus - Voortman

Combined Drill ?Range
Metric: 14 to 40mm
Inch 0.5625" to 1.5625"

Minimum to Maximum Drill Depth Range
35mm to 224mm
Straight or helical flute options up to 7 x drill ?Choice of high performance substrates and coatings
Range of insert geometries
Outstanding tool life
Dedicated holder ? for increased rigidity
Through body coolant

T-A1 and 1.5 Series Holder Range

Tungaloy PGT Indexable Turning Inserts

NS530/NS540 (ISO P05-P20) A finishing grade for steel and stainless steel. Gives a superior and consistent surface finish.

Allied Maxcut Series 3 Inserts

For all dimensional specifications please refer to our catalogue.

GEN2 T-A HSS CPM-M4 TiN Coated

Granlund Size 1 Insert Drills

Type B HSS Tol. h8 flute 25mm.

When combining insert drills with countersinks, the drill must break through the work piece before secondary cutting commences and must not be used for blind holes.

For all technical specifications please refer to our catalogue.

Indexa-Seiki VDI Toolholders

Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.

E2 Boring Bar Holders

Pinzbohr Standard Arbors

A comprehensive flexible boring system available for use on the majority of conventional and CNC machines.

BT MAS 403

PNZ-144-1200K/PNZ-144-1240K/PNZ-144-1280K/PNZ-144-1780K and PNZ-144-1820K are the preferred Arbors for 'MICRO' Series Heads.