产品 / 切削工具 / 数控刀具&附件
编号：AME1561519J
●产品描述：
Allied Maxcut Series 1 and 1.5 Inserts
For all dimensional specifications please refer to our catalogue.
GEN2 T-A HSS Super Cobalt AM200 Coated
编号：IND1075354K
●产品描述：
Indexa-Seiki Indexable Tooling Spares
Within the Index-Seiki? range of indexable tooling spares you will find insert screws, Torx? keys, shims, clamps and pins to fit the Index-Seiki? toolholder you?re using.
编号：IND1393420K
●产品描述：
Indexa-Seiki? "Tri Square" Milling Cutters
Uses top clamping triangular inserts to produce a 90 shoulder at the edge of a milled face. This is of major benefit when taking a number of cuts across a face as the shoulder produced is without steps.
编号：GRA1513721A
●产品描述：
Granlund HSS Size 1 Counterbores
Type N. HSS. Tolerence P8.
Counterbores N with a diameter of 50mm and larger are all made with a driving lip. These sizes should be used in the appropriate type M toolholder.
For further specifications please refer to our catalogue.
编号：IDX1443720K
●产品描述：
Indexa-Seiki ER - Single Angle Collets
Collet Dimensions:
Capacity 2.0-20.
(D)33mm x (L)40mm.
ER32
编号：IND1445974K
●产品描述：
Indexa-Seiki MT-Morse Taper Adaptors
With internal morse taper socket. For use on drilling machines etc. For drills, core drills, reamers etc. Manufactured to stringent quality standards.
To BT-MAS 403
编号：IND1481610K
●产品描述：
Indexa-Seiki VDI Toolholders
Manufactured to DIN 69880. Suitable for use in NC lathes with VDI fixing disc. Features: All tools are fully carburized and hardened. Surface hardness of 58-60HRc. Tensile strength above 1000N/mm2. Surfaces blued; seat, parallel shank and shoulder ground. Tools can be adjusted in-situ on radial and axial toolholders. Seat shim allows two tool sizes to be used with one toolholder. Ball regulator (bullseye) provides easy coolant control.
Radial
Long B5 Right Hand
编号：AME1561199E
●产品描述：
Allied Maxcut Series 0 and 0.5 Inserts
For all dimensional specifications please refer to our catalogue.
GEN2 T-A HSS Super Cobalt AM200 Coated
编号：GRA1514087A
●产品描述：
Granlund Size 1 Pilots
Type RS Roller Tol. c9.
When working 'dry' type R roller pilots must be lubricated. Pilots type RS must be combined with holders type AS.
For all technical specifications please refer to our catalogue.
编号：GRA1513009F
●产品描述：
Granlund Size 1 Insert Drills
Type B HSS Tol. h8 flute 25mm.
When combining insert drills with countersinks, the drill must break through the work piece before secondary cutting commences and must not be used for blind holes.
For all technical specifications please refer to our catalogue.